3 Left. $10 each, $1 US Shipping. $2 Canada/UK Shipping.

These are based on the Plesur layout in the Formula No 5 thread

For sale I have a lot of rare ICs. Lots of hard to find MN chips for all your delay and modulation effects (CE-1, DMM, Aquapuss, DM-2 etc.) as well as some neat old metal can op-amps (Rat, Dyna-comp, Ross Compressor etc.). All chips are NOS and genuine!!!

MN3001 x3
MN3002 x7
MN3205 x3
MN3207 x4
MN3102 x3
MN3005 x3
MN3008 x4
Metal can package CA3080 x3 (one lightly used)
Metal can package LM308/SG308 x9

Also throwing in one HCF4047BE and one SA571N for all you DMM builders!!...

After some investigation, it appears that I need to replace the inductor in my 1974 Colorsound Wah Fuzz Straight.

Any recommendations for the best replacement that would replicate the original sound the closest? Whipple, Fasel Red or Yellow? Any others that I need to consider?

Thanks!

Hi all,

I really need to get my hands on a couple of 5k linear right-angled PCB-mount pots with split/knurled shafts.

Like these:

But with shafts like this:

Anyone know where I can find any?

Thanks!

R.

I am in need of the following parts:

1 x Stereo True Bypass Stomp Switch
4 x soft touch momentary switches
2 x large style knobs capable of being foot controlled or mxr knobs and rubber covers (for dl4 expression on side mod)
10 x 1n34a/1n60

I have a digitech digiverb and a few diy pedals I have done....Sonic Titan, Hyper Pak and Dyna Red.....that I am wiling to trade. PM me with email address and I will send some pics your way. May have parts to trade as well.

hello,
i have some NOS rare piher resistors for sale, or maybe for trade ( make me an offer ) , for your vintage marshalls, hiwatt, vox, and it was used into some guitare effects. i'm selling sets, not really spare values in a custom list, but i have several different sets that aren't listed yet.

many more values and quantities, in 1/3w , 0,5w and some 1w.
i could trade several sets for a vintage 18v electric mistress.
thanks.

OK Here is a list of what I have in box #1 (future boxes to follow)
Let me know how many you need and I will start counting.
FYI, I have no idea how many of each that I have and pretty much weigh them by the pound so I need to lessen the load over here.

radial electrolytics
33uf 10v
33uf 16v
.1F 5.5v
100 uf 16v
100 mf 6.3v
47uf 16v
47uf 10v
47 uf 6.3v

Axial electrolytic
33uf 16v

Feel free to email me and thanks for looking!
More to follow

Regards,
George

Its time to shed the stuff thats been cluttering the workshop for the past few years. Ive chucked it all in a box, and it may be of use to someone.
Theres about 5 cans of spray paints in there. Some PCB's , trannys, wire screws etc etc! Guitar bridge i think jack leads, battery snaps, wire , a few pots etc etc. a few screwdrivers etc etc. Theres a few part enclosures, maybe a few full enclosures,
I dont have time to list every thing in there, all i ask is the postage cost. I dont want to chuck...

Does anyone know where I can buy a couple of grey hammerite finished 1950bb size cases?

Hello everybody!
Ive got a handful of 3PDTS for sale, in the UK. £3 a piece if anyones interested, if you want to take more im sure we can sort something out price wise.

:)

I've uses the following soft-touch momentary switches from Small Bear in the past for replacing the stock switches on the Line 6 DL-4. They work and feel great but they're a little too tall for my liking - with the DL-4 they protrude to high from the chassis - there is no room to lower them inside the enclosure.

Are there any other manufacturers that make the same type of switch but shorter?

I have some NOS 3094E's that I don't need anymore. These are NOS chips, not Chinese knockoffs. I stumbled across a few tubes of them buried in a surplus store. They were all tested in my EH Smallstone Phaser pedal.

$20US for a set of 4 plus a few dollars for shipping.

Email sb dot chadwick at hotmail dot com

Over the years, I have gotten a lot of great info from this site, but have never really helped out here. Hopefully this will help a few people out.

While this place has a ebay store, Its pretty much impossible for them to list their entire stock (Take the virtual view of their store and you will understand why).
The store

Located in Sun Valley, California
8909 San Fernando Road, Sun Valley, CA (Enter that in Google Maps)

I have gotten AWESOME deals there over the last few years.
If you...

Hello folks,

Just another friendly soul looking to pick up some germanium transistors for Fuzz Face variants. I prefer NPN but will look at PNP as well. I will consider tested units or untested lots. I am in Canada so perhaps we can arrange some kind of a trade or perhaps I can purchase and send componets from my side of the pond to you that may be expensive or difficult to find. Name your componet and I will see what I can do.

Thanks!

Cheers

anyone know where to find the knobs? I really like them.

Probably a long shot, but I'm looking for one of the vintage big green MXR Analog Delay cases to put my PT2399 -modded board in. Condition not terribly important but it should at least have the bottom plate. Can buy or trade. LMK what you need.

Where can I get Ohmite Little Demon 1/4W series resistors in less lots than Digikey sells? I'm not really ready for 100pcs/value specially when I need at least 20 values ;)

I'm looking for a few 2SBXX germanium pnp transistors for a fuzz face. Not picky on the actual model, just so long as they are in the correct gain range and low leakage.

Anyone know where to get these square pc mount jacks from? Got a guyatone wah rocker and the pcb was ripped out of the enclosure without the nut being removed from the jacks. Pics:

Three connections on the bottom:

And this is what the nut part looks like

I got a bunch of Tung Sol 1N64's a few weeks ago from my good old Dad, still in the original packaging. Anybody know of a project that uses them? I know the were in alot of early tube TV sets as part of the video circuit... Thanks!

Hi, all. I've been wondering what the actual part is called and/or where to find it, but I have no idea. I'm talking about the metal handle things on the front of Orange amps, and there's a little one on the Trotsky Drive in this pic:

Any information on what it's called or where to find it would be awesome! Thanks!

*BTW, the image is from Beavis Audio Research*