I'm looking for this, or something similar. Can also be SPST. I don't care. It just needs to momentary, normally closed.

Just trying to source a better site that won't ream me on the shipping.

Thank you!

M12 interior, 24mm outer; they look slightly loose when you first slot them on but they sit tight when you tighten them up.

You can buy them on ebay as I did but you get a bag of 100... I don't really want 100.

5p each and 50p 2nd class postage, minimum of 10

I'm planning on doing a DD-5 mod that involves an external control switch which will need 5 wires hooked up - two for tap tempo, and 3 for a TRS hook up to select modes.

I don't want to drill another hole into the chassis for the TRS - since the DD-5 has the stock Tap In. I want to remove the Tap 1/4 and install a 5 pin plug that can take care of my needs: What are my options? I don't know the technical names of other jacks. Would a midi work? What else is there? Also. It would be something...

Only need a couple; they're £1 from Hong Kong so I'll happily pay a little more than that but only local ebay source is £6+ for one chip! Don't really want to wait to import them from HK, just want them for tinkering.

If you've got a handful of 4094 while you're at it, even better! ;)

Hi All,
I have gone through the last of the stash..
I found some more Delay boards (5) for sale $10.00 each + shipping
Also (1) Flanger board ......vintage a/c stlyle....$15.00 shipped.
And finally, chorus boards...about (21) chorus boards $10.00 shipped.

Paypal is fial@frontiernet.net

Thanks
Chris

I aquired a Simms Watt GE-100 Preamp a couple of weeks ago and am not realy sure what to do with it :scratch:

Are there any parts in worth salvaging or is anyone interested in buying as is ?
CIMG0343.JPG
CIMG0344.JPG
CIMG0347.JPG

i usually buy in quantities of 100

the best deals i've found so far for enclosures is 4site/mammoth. 125b for $4.18 each.

beats:

effectsconnection -no bulk discount
small bear -they take like 10 biz days to ship. what a drag
ppp - always over priced on everything
all the big names like mouser/digikey/allied

for 3pdts there's a dude on ebay. forgot the user name but if you sort by price you'll see it's the best deal per unit. he sells them in groups of 25. and they come out to $2.72 per...

Hi,

I'm looking for a source for 5k linear right-angled PCB-mount pots to replace a broken one in an EH Micro Pog.

Something like this but with a knurled/splined shaft.

I'm in the UK.

Any ideas?

R.

do u guys think these are real or fake:

1590bb enclosures $5 each + shipping from Washington State.

ok, this might be my first and last post here! basically I attempted to mod the Daphon analog delay pedal, even sent off to small bear for a V3205 chip and a NE5532. managed to get it going but couldn't get rid of the whining sound so had another go and totally messed it up. then undeterred I decided to have a go at adding a delay time pot to a dano fab echo, not realising how small the components are (sounded pretty simple apart from that). anyway, once I got it open I decided to carry on...

I need the board with (or without) switch. Perhaps you know where to get the replacement, or you've modded you ts9 to TB and you have one spare? Dude, I need !

:scratch: Alright, the almost impossible task of getting an mn3005! I have DM-2 which has a faulty MN3005. I'll pay around $40 for one, kind of negotiable.

There's one possible source on ebay that's not from HK.
Anyone tried these guys?

I just asked them the question of where they got them from..waiting to hear back.

Hey guys, I need to get some switches from pedal parts plus-

Which of the ones they stock do you recommend? I've read that the Taiwanese ones are quality ones and that the Hong Kong ones are crap, is that true? And if so, which of the ones that pedalpartsplus stocks are Taiwanese?

Thanks!

Hi Guys -

I picked up an old MXR Noise gate/ line driver (i'm not 100% sure on the age, but i think the pot code dates it to '77)

I was in pretty bad shap, one of the tant's had burst, the stomp had been replaced with an industrial looking toggle switch, and no base plate.

I've tidied it up and its working, now I just need a baseplate for it.

Tried taking one from my other various 1590b sized enclosures but none fit.

anyone got a spare, random MXR baseplate to sell or trade?

I'm in New...

I have a NOS Recticon SAD1024A I bought new from Small Bear and I'm wanting to trade for SAD512D ?

Hello,

i'm looking for some piher / iskra resistors, please PM me your values, and let's discuss, i've get a lot of different values. i could buy or trade. also, if someone has a wima electrolytic 250uf 6v let me know or some NOS erie / hunts 8u 150v or 10uf 150v as well. thank you.

cheers

Hey Guys,

I'm planning to build a Fuzz Central Axis Face rev. 3 in the near future.
I'm having problems finding the BD139 Transistor, though. Musikding only sells the BD135/16 which I think is not the perfect choice because it is to gainy. What is the other difference between 135 and 139? I can't really tell from the datasheet.
Banzai and Mouser have them, Banzai has expensive shipping which isn't worth it for a couple of transistors, and Mouser would be international shipping, same thing.

Do...

I need to reduce my stash a lot. Be next few days I'll add more items.

Here's the link to what I'm selling

Thanks
Pawel

Anyone know where I can get some cheap 2N2646 unijunction transistors? The cheapest I can find them £1.72 each at Farnell in the UK.

I found an ebay seller selling them at £1.20 but the postage is £2.50 for each one ...

Anybody here who's doing or want to build Forum Vibe and have difficulties with bulb shield material?

3/4 copper pipe ends are perfect for it. There is a bunch of 100 on ebay for $41 (plus shipping) but I need only 1 (I can take 5 for possibly future projects), and I'm looking for a group of people who will do it with me.

LOT OF100 COPPER FITTING CAPS 3/4 PIPE END CAP

The best would be to have someone from USA who can buy it and make shipping, as I'm not sure do the seller ships...

very cheap:

-100nF panasonic caps
-1uF WIMA 5mm caps
-Regulators
-Crystals
-2P6W rotaries
-LM324
-Heatshrink

will forward them on at cost or add the cost of a stamp depending on how much you want, I just don't need £30 of these things!