Up for sell is 2pcs of SAD1024A's and 10pcs of MN3007's. I can add the EHX EchoFlanger board to Reticon order as a bonus if the buyer want to

SAD1024A's is $90, $50 for all 10pcs of MN3007's shipped to European countries. Shipping to US/Canada/Australia is not a problem, but please note that every time when I'm shipping to those countries delivery time is 2 long fucking months!!! No matter what shipping method I'm using, it's always like that :( So European taker is preferred - less stress for...

does anyone know a cheaper source/alternative for a right angle PCB-mount mountain switch?
here's the mouser # 108-1MS1T2B4M7QE-EVX

This is an original working/ good condition Boss DM-2 that got kicked off my pedalboard when I finished my first Aquaclone. I would like to trade it for a six (6) count of MN3005's. My goal is to finish the double delay boards for me and a pickin buddy. It may be a bit crazy to even try to offer this trade given the rarity of 3005's. But hey,value wise its a fair offer and I thought I could give it a shot. :thumbsup

Looking for a Burr Brown OPA2134PA and MAX1044/ICL7660.....

Anyone got any? Looking for a couple of each......could get by with one of each.....

Can pay cash/paypal or trade 3PDT switches, enclosures, or other parts.....

Thanks!

Ones just like this:

Those look so cool! Where can i get 'em?

Free for postage , if it's even worth it
wil post pix later
regards Greg

anyone know where to get one or two of these (other than monte allums website)?

Dual Stacked DIP Adapter

Thanks!

Somewhere I saw one the builders had created a ~3/4 square PCB that sits on the 3PDT terminals and gives you simpler soldering connects for In/Out/LED. I wish I could remember where I saw it....anyway, does anyone sell these?

Hello , :D

As you can see i am new to this forum , but i have been with the idea of making myself a Fuzz Factory DIY pedal for a long time. I will be following this ( ) and I have some things i would like someone to help me with.

First off , here's my shopping cart so far :

Total Price : €12,75

I would like anyone with experience to check it and see if its all good , since its my first build i dont want to screw it up :scratch:

Now the more important ones :

- I will be...

Hi friends,
I have some components here.
Trading is preferred, as I am not really posting here for personal profit.
It's the spirit of DIY :P

You may or may not have a need / use for these, but these are what I have at the moment.
I will continuously update this topic if / when I have additional components.
Pictures are attached... All cap values are based on markings on the caps. Please correct me if I am wrong.

1. National Semicon LM317AT

2. 10uF 16V

3. 0.47uF 35V

4. 100uF 20V...

I recently bought some AC128 NOS PNP transistors from Dr Tweek in the UK. They sound fantastic. There is a lot of fake and imitation transistors out here because i have been on the search for a decent pair for 3 months. Dr Tweek has made me a happy man with Fuzz on my face. Finally a supplier that delivers the real thing. Also one thing i discovered about many Ebay sellers selling BC108 NOS are they are made in India! I know i just got a pair. Do a search on any transistor and look closley at...

where to buy? pricing?
tks

Selling a new Line 6 Tonecore DSP developer kit! I received it as a gift then noticed that I didn't have time to learn a new programming language! More info available here:

I'm selling it for a price of $190, and accept payment through Paypal. I figured I should put it up here before I did on Ebay...I trust you all more with it!

Just need those two, can buy or trade :)

Who manufactures the PCB mount jack used on the most recent EHX products?!?

There is a major difference between this jack and the Neutrik NYS-215 alternative and all of it's asian copies. On the 215, each tab that makes up the tip, ring, and sleeve curls up and over the body mold and over to the normalling terminal on the other side. The jacks EHX is using simply bend over without the curl. My Stereo Memory Man w/ Hazarai has four of these and is why i'm on the hunt.

Sorry for any confusion,...

Looking for some higher gains.
Around 200-300 hFe, low leakage NPN germanium transistors.

PM me if you have some for sale.

Where do you guys like to get TL2262's from? Just realized I'm about to use my last one, and don't recall where I got them from. Maybe Mouser used to stock them. (?) Anyways, I only need a few (5 or so), so I'm not sure places like utsource or loadparts are my best bet...

Thanks in advance!

I'm gettind kind bored the same old b and bb enclosures...

Got any reccomendations for slightly more interesting boxes?

I just ordered one of the these for a big muff im building:

and i really like the look of these for a mojo-bullshit :horsey: fuzzface I have in the works:

(but thats about $50nzd including shipping)

any other cool enclosures you guys have found?

J

As the (very happy!) owner of a 1970, Triangle Era Big Muff Pi, I have scoped out & recorded the components many times, for breadboarding mods,etc, & possible cloning. The ones that throw me (as to where to get exact specs, or better still, to find) are the (4) SPT 87-103 transistors.

Also: the diodes on this one read: GY 918 (or GY 816, looking upside down?)

The trannies sport a T mark on the opposite side of the part #, who's right end inflects upwards - like a kind of fancy script T ... &...

1n34As seem to be going for silly money everywhere except musikding, who are nice guys but I don't want to have to pay shipping from germany just for a handful of diodes!

There are good deals on 1n60p on ebay- how do they sound?

Likewise there are some good deals on NPN AC176s (and Dr Tweek has those too at good prices)- working on the assumption half of them will be unusably leaky, do they have the 'mojo' sound? would I be better off just piggybacking 2n3904s? I suppose I should try it for...

I'm redoing the preamp on an older Yamaha classical guitar. The pots are push-latching and recess back into the body when in the down position.

So, here goes. I'm looking for a pair of 100k push latching pots with 3.5mm shaft, d-flatted, pcb/pin termination. At this point, I'm not particular about the taper or tolerance, and could even work a bit either way on resistance.

Hi friends,
I'd like to purchase some 500K reverse log pots.
I know, Small Bear etc etc, but the shipping fees are more than the part itself, as I am from Asia.
Any kind soul has some spares to let go of?
Thank you...

Ok, I would like not to compromose My latest Aquaclones with anything less than real MN3005's
Q; Are all Ebay (china) sellers a rippoff, any reliable sources ?
Q; Only need 4 to complete My projects.Anybody Sell me some ? :lol: PM me if so.
Q; If I end up going the V3205 rout wil I hate myself for it ? :slap:

Etching anything you want, as long as you have the transfer and the creator is cool with it. (ie, NO Madbean-designed boards).

Pricing is based on size and drilling and ranges $7-15 for typical boards. Quantity discounts. Continental US Shipping only, Payment through Payal.
I'm using 1oz CEM/FR-4 Stock in various awesome colors. At this time I'm only offering single sided etches.

If you'd like me to design a board from your schematic, I'm more than happy to do that when I have free time, for...

I have this from ebay, arrived broken (LED surrounded by LDR's are not flashing until internal bias pot turned at full, then flashing, but stay like this, no pulsing at all). It's half SMD, half true hole, so since I now shit about trouble shutting SMD based units, I'll give it out for free to the member who does know this stuff. I don't need any payment as another CS is coming to me (ebay seller turns out to be a human ;) )

PM me if interested, or better email me at fuckthespambots...