I have one of these here for a week or so. I'm kind of working on a schematic but any help would be appreciated. I'll take pics of anything you want and try and help with any values/info you need.
Here are some pics. If there is interest in this I will continue with the schematic and post it. Don't really want to post a unverified, unfinished schematic. I'll try and post some values later.
20190510_105853sm.jpg
20190510_105900sm.jpg
20190521_093222sm.jpg
20190521_093226sm.jpg...
Looks these don't ship until November. What do you guys think so far based on the gut shot? Looks interesting with the 3 trim pots....
JHS-Pedals-SuperBolt.jpeg
From the JHS website:
From the inception of the Supro Company in 1935 until its closing in 1968, no other brand of amplifier has had such a fascinating, mysterious and legendary story. The Supro delivers the voice of rock and roll, from Jimmie Page’s legendary Led Zeppelin recordings or Brian Setzer’s early Stray Cat tracks, to the...
Someone share me the SFT REV 2 for the week, so I take pictures and get values of capacitors and pots, maybe it can help for helping debugging the previous tracing.
This is pictures:
I can give you more information but you need to be really fast, because I will give back the pedal tomorrow.
My guess? Big Muff with 2N130X transistors with LED's as diodes for the fuzz stages.
Edit: found another gut shot at Discofreq
Edit2: from their werbiste:
Hoof Fuzz
EarthQuaker Devices Hoof Fuzz can produce sounds all the way from gritty overdrive to a huge wall of doom! It is a germanium/ silicon hybrid big muff style fuzz (it's based on the old green Sovtek Big Muff but it's a pretty different dude now) with massive amounts of volume and sustain on tap. It has a...
I'm going to build a BJF Honey Bee Overdrive and am curious about this new SMD version put out by One-Control Effects (Chinese Company?), but designed by Bjorn Juhl.
i64.tinypic.com/t8so5i.png
Based on the description the component values should be very close or the same, but the key feature is a 'Vintage / Modern' switch that goes from standard Honey Bee, to a lower-mids emphasized, throatier sound more suited to Humbuckers. My guess is that it swaps a couple components to alter the...
It was shown at Summer NAMM 2016, never heard of again?
Googling klon clean boost explains the reason why it seemed like a great idea, but doesn't give me any information...
Great pedal with Pomb Proof construction / Anybody traced the schematic. Seems to be a simplified Pork Loin with 2 sets of led clippers and a tl074 quad op amp.
clipper pair 1 is under the multi connector, the other pair is by the dual drive pot underneath the board.
Would love to have the Uber :thumbsup pedal designer George Tripps / Mr Huge chime in on the origins and possible mods. :applause:
Hi all : ) really intrigued as to what's going on with this one.
From what I can see this is his only product, and the last thing I want to do is step on any toes, so might be too soon for it.
But if anyone can have a go at a block description like we did with the Sick As, that'd be great.
There's a few blurry board shots on his Instagram, and this dudes had a bit of a go
With 4 IC's I'm thinking one for the relay, one for buffer, one for the drive section and maybe a charge pump?
I picked this up for almost nuthin so, I figured I would do the right thing, bust it open and get some pictures for all the pedal junkies here at FSB... I will try to trace it as I get time but, don't hold your breath... If somebody wants to have a go at it from the pics that's fine with me! If needed I can answer any questions you may have, get some better pics, part values, voltages etc..
This is a cool little box, loud as hell for the size and it's about as heavy as a paper clip!! Sounds...
Saw this on PGS last night and was just curious if anyone's traced it yet. Sounds like it MIGHT have a little flab to the low-end, but wouldn't mind building one.
Please Note! The first image in the thread (below this post) shows the bright control drawn incorrectly. The corrected schematic is attached with my response to Manfred, thanks again.
Also worth pointing out the stock Dual Op Amp was a JRC4558 but is socketted and can very easily be swapped.
Wiring convention:
I really should have mentioned this earlier, thanks snk. Lug 3 of each potentiometers is the side shown above or to the right of the wiper.
Trace of a 'Stax Master' designed by Lee Anderton & Sean Michael. The printing on the enclosure suggests that it's painted by Tayda or a company which uses the same printing method.
Op-amps are SMD 4558s. Whole board is SMD actually so I couldn't get capacitor values for everything.
The TS side is pretty boring but the BB side is cool if not a little dark.
White side is first in the chain, and is followed by the Black side.
The Nordland ODR-C Custom Overdrive is an updated version of the Nobels ODR-1, handmade in Germany by original designer Kai Tachibana, adding several features and tweaks to the classic circuit. An amazingly well-crafted pedal and worthy of the hype.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum
Last post
gpkcaminha 
Last post
modman 
Last post
rcustoms 
Last post
Intripped 
Last post
plush 
Last post
Ichabod_Crane 
Last post
Jarno 
Last post
snk 
Last post
Paul_5 
