:applause:

Taking pictures as I type! Just got it about an hour ago along with some nordstrand pickups for my bass! :D

So next post will have the piccies!

Found this schematic on the internet:

I like the idea of the Fet gain stages after the baxandall tone control... plus the youtube demos sound quite well.

Does anyone have more info?

I apologize in advance if this is not the place for posting this. I realize this is not technically a boutique pedal, but maybe it could be one!

I own a MusicMan 212-75 with a phasor (phaser) effect. It has recently stopped working, and so I have two missions: the first is to try to isolate the phasor circuit from the amp schematic, breadboard it, duplicate it in a pedal enclosure. Hopefully after accomplishing this, I will understand the circuit enough to fix the inboard effect on my amp,...

who have gut shots of the Rothwell Hellbender?

is a great pedal for AC/DC

Custom one-off MK1 Tone Bender on slightly modified Zonk Machine layout.

Basicly - modified Zonk with diffrent biasing and larger capacitor.
Im' not 100% sure R2,R2 and R10 values, I just followed Zonk schematic. Should work fine.

Is this really ibanez?

Not sure whether anyones interested but........ heres all the gut shots i took of this pedal. I haven't traced it myself but i thought someone here may be able to make short shrift of this. hopefully the pictures are clear enough to help. the board splits into the main circuit and the ancillaries power board. Its a very smooth sounding overdrive but volume output isn't the best (unity at 1400hrs)

any who for those that are interested: here they are

Ive...

So. Anyone has any information on this one? It seems to be a nice sounding overdrive.

I stumbled on a blog post with a few photos, but there's not much that can be done with those. Anything more than guessing.

I'll throw in my 2c with speculating about the JRC4558 having 1N4148s and Schottkys in the feedback loop. Gain pot at A50K could point the gain setting to be closer to Marshall Bluesbreaker than a TS. 5 transistors in all, could be two AMZ mini-boosts or any other muamp...

Brick Bender dat is!

Project data

Hi everyone, wandering if anyone have this pedal to share the differences between this one and the original Maestro Brass Master.

I am looking forward to upgrade my brass master clone to germanium, thanks a lot

Leandro

Any interest in gut shots of this? Made of a main board and a two separate ones for the switch and another the jacks and power inputs. Main board is two sided with a combination of surface mounted and through hole bits. Can't tell if it is more than two layers. May be a few days (possibly Monday) before I can sucessfully share it however. Just want to gauge interest. I have never traced anything before, so I think I'll have to leave it to the more motivated among you. Personally I am most...

I'm here with a noise. I seem to be modified mxr tonepad.
has two LED, one acting with the noise gate.
have fun

Nice little dirt circuit:

wizard fountain gain pot.jpg

The twist control is odd but interesting. At absolute minimum it produces a gated, octave-up, sort of poorly superfuzz sound. There's a volume bump as you start to turn it up, and it becomes a much more polite kind of dirt: It then becomes gradually gainier/fuzzier as you dial up to max.

Boosting the input gain by bypassing Q1's emitter resistor with a large electro gives a wider range of sounds, and the minimum twist madness sound can...