Boss - OD-1 Overdrive  [schematic]

All about modern commercial stompbox circuits from Electro Harmonix over MXR, Boss and Ibanez into the nineties.
gotheriff
Posts: 6
Joined: 21 Jan 2017, 13:20

Post by gotheriff »

printed cir checked for dry joints etc all ok 1

gotheriff
Posts: 6
Joined: 21 Jan 2017, 13:20

Post by gotheriff »

lack of my knowledge can't find any problems visible !

gotheriff
Posts: 6
Joined: 21 Jan 2017, 13:20

Post by gotheriff »

pic

roseblood11
Tube Twister
Posts: 1857
Joined: 23 Aug 2008, 15:21
Has thanked: 289 times
Been thanked: 256 times

Post by roseblood11 »

Does anybody have a vero board layout for the quad opamp version and true bypass?

User avatar
Cub
Resistor Ronker
Posts: 416
Joined: 29 Aug 2011, 08:14
Location: The Netherlands
Has thanked: 56 times
Been thanked: 63 times

Post by Cub »

roseblood11 wrote:Does anybody have a vero board layout for the quad opamp version and true bypass?
Hey rose, this should do the trick. Paul In The Lab - Boss OD-1 Original RC3403 Quad Op-amp Stripboard Veroboard layout
For some great recommendations on diodes, check this thread from our Baja. Baja DS-1 distortion to fit inside a 1590B enclosure [verified]
I wish I were a chestnut tree, nourished by the sun.
With twigs and leaves and branches and conkers by the ton.

roseblood11
Tube Twister
Posts: 1857
Joined: 23 Aug 2008, 15:21
Has thanked: 289 times
Been thanked: 256 times

Post by roseblood11 »

yupp, that's the one I remembered

Post Reply