Joyo - JF-17 Extreme Metal [gut shots]

All about modern commercial stompbox circuits from Electro Harmonix over MXR, Boss and Ibanez into the nineties.
Post Reply
User avatar
marmaliser
Breadboard Brother
Information
Posts: 135
Joined: 21 Jun 2010, 18:14
Has thanked: 52 times
Been thanked: 42 times

Post by marmaliser »

Sanded IC's intriguing :scratch: Looks like a EHX Metal Muff. The fact that the Boost feature is almost unusable due to the extra Treble and Noise added also makes me think its a Metal Muff.
Anyhow just for the record here are some pics
P6280129.JPG
P6280129.JPG (79.88 KiB) Viewed 6446 times
P6280117.JPG
P6280117.JPG (117.14 KiB) Viewed 6446 times
P6280122.JPG
P6280122.JPG (140.76 KiB) Viewed 6446 times
P6280121.JPG
P6280121.JPG (144.53 KiB) Viewed 6446 times
P6280127.JPG
P6280127.JPG (136.35 KiB) Viewed 6446 times

User avatar
Scruffie
Opamp Operator
Information
Posts: 1739
Joined: 13 Mar 2009, 17:59
Location: UK
Has thanked: 28 times
Been thanked: 170 times

Post by Scruffie »

Isn't the Metal Muff fairly simmilar to a BOSS HM-2 or MT-2... I don't know why but it seems less likely to me that they got the EHX schematic... maybe it's just me as the boost feature does give it away some.

User avatar
greeny23
Information
Posts: 46
Joined: 20 Mar 2011, 10:17
Has thanked: 4 times
Been thanked: 12 times
Contact:

Post by greeny23 »

The only pedal with smd from joyo?
the toyroom effects guy.

"My Pedals Kicked Ass! Don't be Jealous Boutique Builders! My Pedals Had Tone! AND YOU KNOW IT! Go Buy the Same LOUSY shit!"- Ken.

User avatar
Steven_M
Resistor Ronker
Information
Posts: 386
Joined: 06 Jul 2009, 19:50
Has thanked: 59 times
Been thanked: 35 times

Post by Steven_M »

greeny23 wrote:The only pedal with smd from joyo?
No, there are quite a few. All of the Tech 21 rip offs are SMD also.

User avatar
JiM
Diode Debunker
Information
Posts: 967
Joined: 11 Mar 2008, 22:56
Completed builds: Completed builds :
Proco Rat
MXR MicroAmp in a volume pedal
TubeDriver (w/ NoS russian tube and big muff tone contol) + Phase 45 (w/ univibe cap ratio)
Dallas Rangemaster (w/ noisy OC75, negative ground)
SubCaster tube booster (w/ NoS russian tube, PtP)
Hot Harmonics
Music From Outer Space SubCommander in progress
Crackle Not OK
Simple bass blender in a 1590A
Bazz Fuss with a photo-darlington
Location: France
Has thanked: 70 times
Been thanked: 66 times
Contact:

Post by JiM »

marmaliser wrote:Sanded IC's intriguing :scratch:
This doesn't look like sanded to me, just dirty with flux residue. :mrgreen:
I only give negative feedback.

User avatar
snabero666
Information
Posts: 5
Joined: 02 Nov 2008, 08:50
Been thanked: 2 times

Post by snabero666 »

Good day forumite,

Here's a mod that you can apply to extreme metal with great result. Extreme metal has the same distortion circuit with metal muff and boss mt2 with fix mid freq and additional boost circuit minus fet switch.So I try the mt2 no nasal sound mod. removing two capacitors C2 and C10 using cutter or nail puller.
Image

here is some sound sample



the distortion will be dynamic and its more marshallish tone with great bass. the boost now makes the mid more pronounce or making it metal but still dynamic. This mod can be used at metal muff. good luck.

User avatar
dimacotorobai
Information
Posts: 1
Joined: 04 Feb 2017, 11:35

Post by dimacotorobai »

hello!what is nominal of c51,c2 and c10 capacitors?

User avatar
mccy
Information
Posts: 2
Joined: 22 Feb 2021, 04:07

Post by mccy »

Hi, I started building a digital clone of the Extreme Metal



and found that it is not as easy as I thought... Cod someone help me what's going on inside? There seems to be kind of parallell distortion to keep the Bass tight. I'd just need to understand the basic concept, the rest is earwork :-)...

best regards

Martin

Post Reply