Ibanez - SP-5 Slam Punk Distortion [schematic]
I'm just wondering...is there anything going on there that I couldn't do myself?
Seems not...
https://sites.google.com/site/flofxdiy/ ... re-housing
Seems not...
https://sites.google.com/site/flofxdiy/ ... re-housing
- Attachments
-
- Ibanez - Slam Punk SP5
- ibanez sp5 slampunk.png (162.91 KiB) Viewed 2098 times
Hi!
If someone's interested I have this verified veroboard version of SP-5. It's lacking the gyrator and bypass circuit, though.
The sound is "a bit" on the darker side. The output cap is quite large (10uF), so maybe that would be the first place to tinker with.
Otherwise it's a distortion pedal like so many others, nothing too fancy. Not too far from the TM-5.
If someone's interested I have this verified veroboard version of SP-5. It's lacking the gyrator and bypass circuit, though.
The sound is "a bit" on the darker side. The output cap is quite large (10uF), so maybe that would be the first place to tinker with.
Otherwise it's a distortion pedal like so many others, nothing too fancy. Not too far from the TM-5.
I don't know why, but I seem to have missed a verified vero version of this on tagboardeffects. And it's been there for ages... D'oh.
Needles to say, I strongly recommend that version over this one
Needles to say, I strongly recommend that version over this one
- CheapPedalCollector
- Resistor Ronker
The attachment seems broken, can someone repair it?
- Nocentelli
- Tube Twister
Information
- Posts: 2222
- Joined: 09 Apr 2009, 07:06
- Location: Leeds, UK
- Has thanked: 1152 times
- Been thanked: 954 times
Found the schematic here:
http://www.8bitsindgenug.net/mn0bit.htm
via mirosol's blog
Not my drawing, but I have attached it to try and preserve it here at FSB forever: Looks like a Rat with a second opamp gyrator stage for the EQ control, along with buffers to allow electronic bypass switching.
http://www.8bitsindgenug.net/mn0bit.htm
via mirosol's blog
Not my drawing, but I have attached it to try and preserve it here at FSB forever: Looks like a Rat with a second opamp gyrator stage for the EQ control, along with buffers to allow electronic bypass switching.
modman wrote: ↑ Let's hope it's not a hit, because soldering up the same pedal everyday, is a sad life. It's that same ole devilish double bind again...
- CheapPedalCollector
- Resistor Ronker
Thank you, needed it to do a repair, although I managed without.
Not a very good sounding pedal I have to say.
Not a very good sounding pedal I have to say.