Colorsound WOW Pedal
- sinner
- Old Solderhand
Information
- Posts: 4709
- Joined: 06 Nov 2008, 17:16
- Location: ...no more
- Has thanked: 1031 times
- Been thanked: 909 times
Here's perfboard layout of (AFAIK) Colorsound WOW Pedal
It's not exact sized to original as I don't have one here, but it's close to what it was back then and is now (in current reissue).
Perfboard is standard IC pitch (0,1") resistors 1/2W CC, caps are sized for new production orange Vishay/BC/Phillips - Vishay BC 0,1uF 250V 10mm raster, and Vishay BC 0,22uF 250V 15mm raster or vintage Tropicaps of similar raster
Sized to take "Halo" type spaced inductors. I trust real ones are 800mH giving different sweep range. To mimic it change 10nF (*) "sweep cap" to bigger one like 15nF-27nF, this should shift the WOW range into more growling side of darkness
Don't forget to ground chassis sweetheart
It's not exact sized to original as I don't have one here, but it's close to what it was back then and is now (in current reissue).
Perfboard is standard IC pitch (0,1") resistors 1/2W CC, caps are sized for new production orange Vishay/BC/Phillips - Vishay BC 0,1uF 250V 10mm raster, and Vishay BC 0,22uF 250V 15mm raster or vintage Tropicaps of similar raster
Sized to take "Halo" type spaced inductors. I trust real ones are 800mH giving different sweep range. To mimic it change 10nF (*) "sweep cap" to bigger one like 15nF-27nF, this should shift the WOW range into more growling side of darkness
Don't forget to ground chassis sweetheart
- sinner
- Old Solderhand
Information
- Posts: 4709
- Joined: 06 Nov 2008, 17:16
- Location: ...no more
- Has thanked: 1031 times
- Been thanked: 909 times
Mind the pinout, it's not usual CBE
- sinner
- Old Solderhand
Information
- Posts: 4709
- Joined: 06 Nov 2008, 17:16
- Location: ...no more
- Has thanked: 1031 times
- Been thanked: 909 times
Not by me. Sadly i have no much feedback about project verifications, as the comments on t.org are masivly attacked by spambots, so i switched it off. It's true to the schematic, so shouldn't be a problem.
Be a man, funk the shit out of it, and let me know
Be a man, funk the shit out of it, and let me know
- sinner
- Old Solderhand
Information
- Posts: 4709
- Joined: 06 Nov 2008, 17:16
- Location: ...no more
- Has thanked: 1031 times
- Been thanked: 909 times
It's just 9VDC, wont hurt youG5120fx wrote:Let´s see if I´m brave enough
Or should i say "sir, yes Sir"
- G5120fx
- Breadboard Brother
Did i say, i freaking hate perfboard? No? I FREAKING HATE PERFBOARD!!
I built it and it´s not working. DAMn, spend some time debugging, but with no effort. I´m pretty sure I made mistakes. So, I will keep on debugging, and maybe I´ll build it again. The funny thing is, if i touch the trannies I get a (very distorted and ugly) sound...
I´ll keep you updated
I built it and it´s not working. DAMn, spend some time debugging, but with no effort. I´m pretty sure I made mistakes. So, I will keep on debugging, and maybe I´ll build it again. The funny thing is, if i touch the trannies I get a (very distorted and ugly) sound...
I´ll keep you updated
- sinner
- Old Solderhand
Information
- Posts: 4709
- Joined: 06 Nov 2008, 17:16
- Location: ...no more
- Has thanked: 1031 times
- Been thanked: 909 times
Give me 30 minutes, I'll put my kid to bed and will try to understand who fucked up
- sinner
- Old Solderhand
Information
- Posts: 4709
- Joined: 06 Nov 2008, 17:16
- Location: ...no more
- Has thanked: 1031 times
- Been thanked: 909 times
R U sure about the transistor pinout? WOW pedal is BCE
BTW, want me to do the PCB of it?
I'm quite sure I did the stripboard as well if you feel more comfortable with that sort of thing
BTW, want me to do the PCB of it?
I'm quite sure I did the stripboard as well if you feel more comfortable with that sort of thing
- sinner
- Old Solderhand
Information
- Posts: 4709
- Joined: 06 Nov 2008, 17:16
- Location: ...no more
- Has thanked: 1031 times
- Been thanked: 909 times
No I didn't, lolsinner wrote: I'm quite sure I did the stripboard as well if you feel more comfortable with that sort of thing
I could do one for you my dear Perv (I would love to heard that story one day), but I have a line of projects I promised already ;/
- G5120fx
- Breadboard Brother
I´ll keep debugging tomorrow, enough for today. You don´t have to make a pcb (i hate drilling the holes lol), let´s see if i figure out what went wrong...
I have to learn how to use perf, so it´s ok!
So i´ll keep you updated, good night sweetheart
I have to learn how to use perf, so it´s ok!
So i´ll keep you updated, good night sweetheart
- sinner
- Old Solderhand
Information
- Posts: 4709
- Joined: 06 Nov 2008, 17:16
- Location: ...no more
- Has thanked: 1031 times
- Been thanked: 909 times
Steel wool is the key 000, or 0000 rock ass. Also must-have-tool to clean home made PCB'sI have to learn how to use perf, so it´s ok!
Sleep well puppy :*So i´ll keep you updated, good night sweetheart
- sinner
- Old Solderhand
Information
- Posts: 4709
- Joined: 06 Nov 2008, 17:16
- Location: ...no more
- Has thanked: 1031 times
- Been thanked: 909 times
Yey
Maybe lower the input resistor value?
Maybe lower the input resistor value?
- cortezthekiller
- Breadboard Brother
I recently found a drawing I made of the circuit board for the original colorsound wah pedal. It's same layout that Sinner posted and the version I drew says that the transistors used in it were BC169B, same as the overdriver. Just another piece of history for the colorsound wah versions.
- cortezthekiller
- Breadboard Brother
Two other differences I found are that the 10uF cap in the bottom left corner is 4.7, and the 470 ohm in the middle above the inductor is actually 470K.