JTEX Indicator: 9V Low Battery Indicator & Power-On Flasher  [documentation]

Original effect designs complete with schematics, layouts and instructions. Freely contributed by members or found in printed or online publications. Cannot be used for commercial purposes without consent of the respective owners of the copyright.
Post Reply
User avatar
JTEX
Information
Posts: 9
Joined: 27 May 2021, 13:31
Has thanked: 6 times
Been thanked: 31 times

Post by JTEX »

I use this in all my active instruments, and also in some outboard 9V battery powered boxes. The Indicator flashes green about once per second to remind you that your electronics are powered on. When the battery drops below 7 volts, the light turns solid red.

The Indicator draws a very tiny amount of current from the battery (just 30 microamps while the battery is good), so it won’t drain it while monitoring it.

I think it would make a fun first-time surface mount project, since only one part needs to be of the surface mount variety (the dual comparator).

Cheers

Jerry
JTEX_Indicator.png

Post Reply