150mH inductor for Bartolini NTMB
- SPeter
- Cap Cooler
Hi all! Need help finding inductors for Bartolini NTMB - 150 mH , 78 - 80 Ohm DC resistance!
Appears it's rather hard to find this value!
Looked through all DiGI-Key site and found one but 300 Ohm DCR!
http://search.digikey.com/scripts/DkSearch/dksus.dll
But even this one is not in stock!
Does anyone knows source for this specific inductor!
Any help is highly appreciated!
Thanks in advance!
Appears it's rather hard to find this value!
Looked through all DiGI-Key site and found one but 300 Ohm DCR!
http://search.digikey.com/scripts/DkSearch/dksus.dll
But even this one is not in stock!
Does anyone knows source for this specific inductor!
Any help is highly appreciated!
Thanks in advance!
- chicago_mike
- Tube Twister
this is the mystery...
I can get in contact with Bill Batolini, but I dont know if he'll give that info out, plus his stuff is all smt.
I can get in contact with Bill Batolini, but I dont know if he'll give that info out, plus his stuff is all smt.
Skyline FX 2013
- ansil
- Cap Cooler
Information
- Posts: 491
- Joined: 03 Mar 2009, 21:49
- my favorite amplifier: my hughes and kettner blue 30r
- Completed builds: 3 jcm 800 builds
4 vintage plexi builds
2 bogner ecstasy preamps [both for personal use]
10 marshall guvnor mods and builds
100 jungle kat boosts
too many penguin love's to count.
5 blues pearl purplexed
dozen tube screamer fulldrive whatever you call them variants
hell i can't type this long it will piss off people what can i say i have been doing mods on toyz appliances gear sex toyz computers and such for 27 years. i started when i was 6 taking stuff apart. - Location: cleveland tn
- Has thanked: 15 times
- Been thanked: 13 times
- Contact:
perhaps it would be wise to learn winding your own my friend:)
- chicago_mike
- Tube Twister
perhaps it's time for me to keep looking cause I'm frikkin lazy my friend...
j/k
But yeah...I should learn shouldn't I?
j/k
But yeah...I should learn shouldn't I?
Skyline FX 2013
- ansil
- Cap Cooler
Information
- Posts: 491
- Joined: 03 Mar 2009, 21:49
- my favorite amplifier: my hughes and kettner blue 30r
- Completed builds: 3 jcm 800 builds
4 vintage plexi builds
2 bogner ecstasy preamps [both for personal use]
10 marshall guvnor mods and builds
100 jungle kat boosts
too many penguin love's to count.
5 blues pearl purplexed
dozen tube screamer fulldrive whatever you call them variants
hell i can't type this long it will piss off people what can i say i have been doing mods on toyz appliances gear sex toyz computers and such for 27 years. i started when i was 6 taking stuff apart. - Location: cleveland tn
- Has thanked: 15 times
- Been thanked: 13 times
- Contact:
chicago_mike wrote:perhaps it's time for me to keep looking cause I'm frikkin lazy my friend...
j/k
But yeah...I should learn shouldn't I?
wow your words not mine. i didn't have a pickup winder for my first guitar pickup so i hand wound it while wathcing internet porn
- SPeter
- Cap Cooler
Yes, but I have no time to experiment that's i am looking for ready to install ones!!ansil wrote:perhaps it would be wise to learn winding your own my friend:)
But for all that are interested here is good information to wind their own inductors!
Enjoy!
- Attachments
-
- Electronics - Inductors - Inductance And Inductors.pdf
- (1.75 MiB) Downloaded 171 times
-
- Electronics - Inductors - Homebrew Your Own Inductors!.pdf
- (224.66 KiB) Downloaded 160 times
- chicago_mike
- Tube Twister
...M'kay....uhh...aria giovanni? Aimee Sweet? Holly Halstrom? Any of these names ring a bell?ansil wrote:chicago_mike wrote:perhaps it's time for me to keep looking cause I'm frikkin lazy my friend...
j/k
But yeah...I should learn shouldn't I?
wow your words not mine. i didn't have a pickup winder for my first guitar pickup so i hand wound it while wathcing internet porn
Skyline FX 2013
- himister
- Resistor Ronker
Damn fine material. For us who like to tinker and make our own....Thanks much Pete.SPeter wrote: But for all that are interested here is good information to wind their own inductors!
Enjoy!
- ansil
- Cap Cooler
Information
- Posts: 491
- Joined: 03 Mar 2009, 21:49
- my favorite amplifier: my hughes and kettner blue 30r
- Completed builds: 3 jcm 800 builds
4 vintage plexi builds
2 bogner ecstasy preamps [both for personal use]
10 marshall guvnor mods and builds
100 jungle kat boosts
too many penguin love's to count.
5 blues pearl purplexed
dozen tube screamer fulldrive whatever you call them variants
hell i can't type this long it will piss off people what can i say i have been doing mods on toyz appliances gear sex toyz computers and such for 27 years. i started when i was 6 taking stuff apart. - Location: cleveland tn
- Has thanked: 15 times
- Been thanked: 13 times
- Contact:
you know i may be wrong but i am pretty sure i found a 150mh inductor at rat shack awhile back but i didn't measure its dc resistance
- SPeter
- Cap Cooler
You may find but the resistance doesn't match!ansil wrote:you know i may be wrong but i am pretty sure i found a 150mh inductor at rat shack awhile back but i didn't measure its dc resistance
- chicago_mike
- Tube Twister
Hey gang...since im new to inductor values...umm
I have a uH chart but need a mH chart...
I have a handful of 470uH but I dont know what these would be good for..
these are totally useless for the bartolini circuit...cant find ANY thing close, even google shows nil.
I have a uH chart but need a mH chart...
I have a handful of 470uH but I dont know what these would be good for..
these are totally useless for the bartolini circuit...cant find ANY thing close, even google shows nil.
Skyline FX 2013
- chicago_mike
- Tube Twister
http://recording.org/users/kev/Inductors.htm
seems like too much work just for 300mH. Maybe we have to do a gyrator.
seems like too much work just for 300mH. Maybe we have to do a gyrator.
- Attachments
-
- Inductance_AR.PDF
- (109.25 KiB) Downloaded 187 times
Skyline FX 2013
- chicago_mike
- Tube Twister
What about something like this for midrange?
Brainstorm : The bartolinis are modules... why not make these as modules too? Duhhhh..
Brainstorm : The bartolinis are modules... why not make these as modules too? Duhhhh..
- Attachments
-
- Vari-Mid for bart.bmp (43.23 KiB) Viewed 2774 times
Skyline FX 2013
- alexradium
- Resistor Ronker
anybody looking for inductors,check out some modular relays,they all gravitate from 50 to 500 mH.
i just found one automotive which is 150 and another 24v relay which is just 310mH.
i just found one automotive which is 150 and another 24v relay which is just 310mH.
- lietuvis
- Breadboard Brother
I have built that bartolini schematic with no good results for mid range whatever inductor i've tried: 3X100mH (high DCR), 2X150mH (high DCR), wah 500mH(low DCR, recalculating capacitors for corner frequencies),300mH high quality very low DCR (sowter). It seems that baxandall tone control didn't really worked for me with inductors, its too much interaction between the low and mid bands or not deep enaugh. Also I think gain stage is over complex with unnecessary resistors too.
But I have great success building ibanez eq schematic and using sowter custom made inductor (same inductance and taps as in Ampeg midrange circuitry ). All 5 corner frequencies sound very interesting ether cut or boost and its more than enough to me to get wide sound palette . I'm using it only for midrange. Also I tried Ampeg SVT 7 PRO midrange circuit by adding Ibanez gain section with very good results too.
But I have great success building ibanez eq schematic and using sowter custom made inductor (same inductance and taps as in Ampeg midrange circuitry ). All 5 corner frequencies sound very interesting ether cut or boost and its more than enough to me to get wide sound palette . I'm using it only for midrange. Also I tried Ampeg SVT 7 PRO midrange circuit by adding Ibanez gain section with very good results too.
- Attachments
-
- SVT 7 PRO PRE AMP.pdf
- (77.64 KiB) Downloaded 192 times
- chicago_mike
- Tube Twister
Reviving an old thread..I picked up a bunch of 150mH inductors with an average resistance of 220ohms.
Perhaps I can actually use these in something??
Perhaps I can actually use these in something??
Skyline FX 2013