getting parts in Canada?
- dtjesus
- Breadboard Brother
Information
Hi all,
Just moved to Canada from UK. Wondering where do you usually get the best priced parts from over here?
Searched ebay.ca but it seems everything being sold is from USA so the postage bumps up the prices. Everything also seems far more expensive than UK. Is that the case?
Thanks guys
Just moved to Canada from UK. Wondering where do you usually get the best priced parts from over here?
Searched ebay.ca but it seems everything being sold is from USA so the postage bumps up the prices. Everything also seems far more expensive than UK. Is that the case?
Thanks guys
- dtjesus
- Breadboard Brother
Information
Ottawa
- Greenmachine
- Cap Cooler
Information
- Posts: 616
- Joined: 31 Aug 2008, 17:59
- my favorite amplifier: Fender Blackface Deluxe Reverb
- Completed builds: Electra Distortion
Roger Mayer Octavia
Klon Centaur (Bajaman/Soulsonic)
DOD 440 Envelope Filter
MXR Phase 90
DOD FET Preamp
Dallas Arbiter Fuzz Face
Soulsonic Hunny Bunny Overdrive
BYOC Analog Delay
Craig Anderton Headphone Amp
Anderton Mini Amp
Bajaman Real Tube Overdrive
Fender Deluxe 5E3 with Tone Stack Mod.
Fender Princeton 5F2-a
Keen Neovibe
Aquapuss Delay
Anderton AMS-100 Guitar Synth (abandoned)
DOD 280 Compressor
Weird Sound Generator
Beavis Audio Noisy Cricket
80's Rat
ROG Thor
Big Muff
Green Ringer
Shin-Ei Fuzz
MXR Dynacomp
COT50
Really Cheap Compressor - Location: Jersey City, NJ
- Has thanked: 87 times
- Been thanked: 17 times
- Contact:
Electrosonic is Canadian, also, you might consider visiting Lee's Electronic's website. They're in Vancouver, I'm not sure if they ship or not.
"[Y]ou want sketchy, dude? I breadboard on a door." -- RnFR, 2011
"This amp is freakin loud, like crazy, I'm going to kill pets loud." -- mich, 2011
"This amp is freakin loud, like crazy, I'm going to kill pets loud." -- mich, 2011
Information
- Posts: 12
- Joined: 18 Oct 2009, 04:37
- my favorite amplifier: stephenson
- Completed builds: ZVEX woolly mammoth clone
- Location: Ontario Canada :D
I live in Canada and mouser has been a good experience. Shipping is $20 for orders less than 200 but the parts arrived in two days and no custom charges.
Pretty fair trade off for me.
Pretty fair trade off for me.
- dtjesus
- Breadboard Brother
Information
Thanks for all the replies guys.
However, apart from online sources, I was mainly looking for actual stores where i could go and buy components in Ottawa. I have been told about Source, Princes Auto, Active parts but none of these seem to carry basic things like even potentiometers..Any place i missed out on?
However, apart from online sources, I was mainly looking for actual stores where i could go and buy components in Ottawa. I have been told about Source, Princes Auto, Active parts but none of these seem to carry basic things like even potentiometers..Any place i missed out on?
- Hides-His-Eyes
- Tube Twister
OT but why the move? Enjoying it so far?
Testing, testing, won too fwee
Hi,
The 'major' parts shops in town that I use are Active on Merivale Rd.; Reset Electronics on Baxter Rd. (out by Ikea) and Gervais Electronics on Industrial Ave. All three shops are distributors for Mode Electronics and can usually get parts in within a week or two if they aren't already on the shelf. If you're doing a major order, you're probably better off doing the online thing but if your in a pinch for a common resistor, cap or transistor, these places should do the trick.
Hope that helps.
The 'major' parts shops in town that I use are Active on Merivale Rd.; Reset Electronics on Baxter Rd. (out by Ikea) and Gervais Electronics on Industrial Ave. All three shops are distributors for Mode Electronics and can usually get parts in within a week or two if they aren't already on the shelf. If you're doing a major order, you're probably better off doing the online thing but if your in a pinch for a common resistor, cap or transistor, these places should do the trick.
Hope that helps.
- Greenmachine
- Cap Cooler
Information
- Posts: 616
- Joined: 31 Aug 2008, 17:59
- my favorite amplifier: Fender Blackface Deluxe Reverb
- Completed builds: Electra Distortion
Roger Mayer Octavia
Klon Centaur (Bajaman/Soulsonic)
DOD 440 Envelope Filter
MXR Phase 90
DOD FET Preamp
Dallas Arbiter Fuzz Face
Soulsonic Hunny Bunny Overdrive
BYOC Analog Delay
Craig Anderton Headphone Amp
Anderton Mini Amp
Bajaman Real Tube Overdrive
Fender Deluxe 5E3 with Tone Stack Mod.
Fender Princeton 5F2-a
Keen Neovibe
Aquapuss Delay
Anderton AMS-100 Guitar Synth (abandoned)
DOD 280 Compressor
Weird Sound Generator
Beavis Audio Noisy Cricket
80's Rat
ROG Thor
Big Muff
Green Ringer
Shin-Ei Fuzz
MXR Dynacomp
COT50
Really Cheap Compressor - Location: Jersey City, NJ
- Has thanked: 87 times
- Been thanked: 17 times
- Contact:
I just moved to Montreal. If anyone wants to tell me where the local parts shops are I'm all ears.
"[Y]ou want sketchy, dude? I breadboard on a door." -- RnFR, 2011
"This amp is freakin loud, like crazy, I'm going to kill pets loud." -- mich, 2011
"This amp is freakin loud, like crazy, I'm going to kill pets loud." -- mich, 2011
- okgb
- Diode Debunker
It's getting harder to find local shops that carries any good stock , active [ here in Winnipeg ]
is on the high side price wise if they even have it , a few common limited things
sometimes the music store repair shops , although it's sometimes a " brand " name price
I need to find a good supplier for cases & switches , Digikey works well for me for average parts
is on the high side price wise if they even have it , a few common limited things
sometimes the music store repair shops , although it's sometimes a " brand " name price
I need to find a good supplier for cases & switches , Digikey works well for me for average parts
- p_wats
- Breadboard Brother
I'm in Toronto and when local shops don't have what I need I pretty much go with Tayda (taydaelectronics.com), as they have a ton of stuff at just about the cheapest around. Shipping might not always be super fast though...
Otherwise I've had success with Small Bear and Mouser too.
Welcome to Canada! I was in Ottawa on the weekend. Beautiful city. You could be one of the lucky ones who gets to ice-skate to work in the winter!
Otherwise I've had success with Small Bear and Mouser too.
Welcome to Canada! I was in Ottawa on the weekend. Beautiful city. You could be one of the lucky ones who gets to ice-skate to work in the winter!