Page 2 of 2

Re: Fender - Fuzz Wah ( 1st edition )

Posted: 11 Feb 2012, 02:37
by CHEEZOR
Im sure there are plenty of future visitors that would love it if you scanned it. :)

Re: Fender - Fuzz Wah ( 1st edition )

Posted: 12 Feb 2012, 00:05
by borislavgajic
:mrgreen: it was out there long time ago...........enjoy

Re: Fender - Fuzz Wah ( 1st edition )

Posted: 16 Feb 2012, 11:41
by looperstar
Am I missing something or is this second one inductorless.

Re: Fender - Fuzz Wah ( 1st edition )

Posted: 16 Feb 2012, 12:01
by borislavgajic
looperstar wrote:Am I missing something or is this second one inductorless.
there is no inductor....it is like Morley wah with pot to ground :thumbsup

Cheers
Boris

Re: Fender - Fuzz Wah ( 1st edition )

Posted: 20 May 2012, 03:57
by soulsonic
For Boris,
:thumbsup
Fender Fuzz Wah Component side
Fender Fuzz Wah Component side
Fender Fuzz Wah Trace side
Fender Fuzz Wah Trace side

Re: Fender - Fuzz Wah ( 1st edition )

Posted: 20 May 2012, 15:38
by sinner
:shock: you're alife Sir

Re: Fender - Fuzz Wah ( 1st edition )

Posted: 20 May 2012, 16:44
by soulsonic
sinner wrote::shock: you're alife Sir
:wink:

I've unofficially quit visiting and participating in all forums, but I still browse here occasionally. I've decided I want to sell my old Fuzz Wah, but I thought the very least I can do is share some good photos of it before it's gone. I will try to measure the values of the silicon transistors too, so you can find a good substitute if you want to make one. I like the fuzz in this very much! It has a cool old-style sound that reacts well with the guitar's controls. But, if I were to build my own (which I probably will), I would definitely make a couple mods: replace the output voltage divider with a proper volume control (at full volume, it's barely unity level), and drop the superfluous 22uF input cap nonsense. Would also do the usual negative ground, since I'd only be building the fuzz part.

Re: Fender - Fuzz Wah ( 1st edition )

Posted: 20 May 2012, 16:52
by DrNomis
Hi Soulsonic, good to see you at FSB....you've been sorely missed.... :thumbsup

Re: Fender - Fuzz Wah ( 1st edition )

Posted: 03 Jun 2012, 17:13
by Groovenut
Ditto. I cant tell you how happy I was to see a soulsonic post that wasn't 2 years old. You have been sorely missed good sir!

Re: Fender - Fuzz Wah ( 1st edition )

Posted: 04 Mar 2017, 23:28
by Imtxn
I have the drawing of the Peterson version, if any one wants it

Re: Fender - Fuzz Wah ( 1st edition )

Posted: 18 Mar 2017, 05:32
by CHEEZOR
Imtxn wrote:I have the drawing of the Peterson version, if any one wants it
Never ask. Just post. Who knows someone years from now might find just what they were looking for. :D

Re: Fender - Fuzz Wah ( 1st edition )

Posted: 04 Aug 2020, 19:41
by GBlekas
I realize this is an old thread but I have one of these I am working on and wonder if someone could answer a question, please? :-)

In the pic of the board there are 3 electrolytic caps on the vintage board but the schematic only shows two for some reason. The one by it's lonesome towards the top of the board by the wah circuit someone changed in the pedal I have and wonder if someone knows what the proper value is for that cap?

I included a pic of the pedal I have just to see the wrong type cap installed in that spot. I think I just realized that should be the cap for the power rail!?

Is that right?

Either way, thanks for the thread! :-)