Maestro PSFS-2 Footswitch Design?

Discussion regarding early stompbox technology: 1960-1975 Please keep discussion focused and contribute what info you have...
Post Reply
pmkipp
Breadboard Brother
Information
Posts: 69
Joined: 05 Oct 2014, 02:11
Has thanked: 15 times
Been thanked: 1 time

Post by pmkipp »

Anyone ever tried to build one of these to work with the Maestro PS-1A Phaser? Would love to figure this out.
Pete's Pedals
St Louis, MO

pmkipp
Breadboard Brother
Information
Posts: 69
Joined: 05 Oct 2014, 02:11
Has thanked: 15 times
Been thanked: 1 time

Post by pmkipp »

I have been researching/working on this and may have something to try when I get some free time. I will post any results
Pete's Pedals
St Louis, MO

pmkipp
Breadboard Brother
Information
Posts: 69
Joined: 05 Oct 2014, 02:11
Has thanked: 15 times
Been thanked: 1 time

Post by pmkipp »

So, I did figure this out. But it is a pain to build, mostly because of the 6 wire connector required and having to build the plug from scratch. It works fine with my PS-1A - the Blue (Slow) switch has to be on.
Pete's Pedals
St Louis, MO

pmkipp
Breadboard Brother
Information
Posts: 69
Joined: 05 Oct 2014, 02:11
Has thanked: 15 times
Been thanked: 1 time

Post by pmkipp »

Update - there was actually a busted switch in my build. Replaced it, now it works perfectly - used with all the onboard rockers in OFF position. Little pop when turned on or off, so need to figure that out...
Pete's Pedals
St Louis, MO

Post Reply