JMI Vox - Grey Wah c. 1967
- Electric Warrior
- Diode Debunker
Actually it's not considered to have been a prototype.
- johnnyg
- Resistor Ronker
Fantastic work Pawel! How do you achieve something that good with diylayout creator?? If it's not a stripboard, vero, or pcb layout it's a right bastard to use.
http://stompboxes.co.uk/forum/viewtopic ... &start=660
Another cool renovation by Mr Castledine:leeyoungun wrote:That's Stuart Castledine's work. http://www.wah-wah.co.ukphibes wrote:Paco, who did the refab board in the very top picture?
Brad/Creepy Fingers built me a mean clone! "Thin whine" is a good description. lol. I really dig the wah tones Page got and I believe The Pretty Things used one on the S.F. Sorrow album.
http://stompboxes.co.uk/forum/viewtopic ... &start=660
Yet to break through the Space Charge
- sinner
- Old Solderhand
Information
- Posts: 4709
- Joined: 06 Nov 2008, 17:16
- Location: ...no more
- Has thanked: 1031 times
- Been thanked: 909 times
We call it talent in poland I'm kidding, that was simple really, specially if you compare it to tagboarded Centaur I'm glad you like it. I can post the same thing but with one extra resistor, with part values close to McCoy if you're fancy?johnnyg wrote:Fantastic work Pawel! How do you achieve something that good with diylayout creator?? If it's not a stripboard, vero, or pcb layout it's a right bastard to use.
- phibes
- Transistor Tuner
Information
I'm putting a fiver down that you finish finish the Centaur!
GuitarlCarl - "TGP = The Gear Polishers"
Ken
Ken
- sinner
- Old Solderhand
Information
- Posts: 4709
- Joined: 06 Nov 2008, 17:16
- Location: ...no more
- Has thanked: 1031 times
- Been thanked: 909 times
You putting what matey? You know that my English is only limited to trow the fucks all around, I'm not get itphibes wrote:I'm putting a fiver down that you finish finish the Centaur!
- phibes
- Transistor Tuner
Information
Five dollars. Which really isn't worth much outside the U.S. these days so looks like your getting shafted.....
GuitarlCarl - "TGP = The Gear Polishers"
Ken
Ken
- sinner
- Old Solderhand
Information
- Posts: 4709
- Joined: 06 Nov 2008, 17:16
- Location: ...no more
- Has thanked: 1031 times
- Been thanked: 909 times
For five bucks I can get one Riken resistor, but still I'll be short for shipping
- sinner
- Old Solderhand
Information
- Posts: 4709
- Joined: 06 Nov 2008, 17:16
- Location: ...no more
- Has thanked: 1031 times
- Been thanked: 909 times
Promised McCoy
- johnnyg
- Resistor Ronker
Thanks buddy - this is really great!sinner wrote:Promised McCoy
So Phibes is betting on you finishing the P2P Centaur man - when I look at that scary thing I think he would lose his 5 bucks!!!
Right - I'm off to watch American Hotrod
Yet to break through the Space Charge
- sinner
- Old Solderhand
Information
- Posts: 4709
- Joined: 06 Nov 2008, 17:16
- Location: ...no more
- Has thanked: 1031 times
- Been thanked: 909 times
It's just GDAKANIE matey sooner or later I'll get my fiver
- sinner
- Old Solderhand
Information
- Posts: 4709
- Joined: 06 Nov 2008, 17:16
- Location: ...no more
- Has thanked: 1031 times
- Been thanked: 909 times
- k1rkyd
- Breadboard Brother
Hi Dan N,The Thomas Organ part # for a 250mh inductor is 80-5044-7. Organ Service Corp. ( http://www.organservice.com/ ) have them on their stock list for $8.00. I don't know exactly what OSC stocks, but they replace a brown TDK in a Fasel style package.
I was wondering what you meant by "brown TDK" as in (TDK) part.
K1RKYD
I stepped up on the platform; a man gave me the news; he said "You must be joking son, where did you get those shoes?"
- sinner
- Old Solderhand
Information
- Posts: 4709
- Joined: 06 Nov 2008, 17:16
- Location: ...no more
- Has thanked: 1031 times
- Been thanked: 909 times
Here you have infamous TDK inductoe
- Dan N
- Resistor Ronker
That is most certainly the infamous TDK inductor, but I'm talking about these guys from rhythm machines.
- Attachments
-
- inds.jpg (40.79 KiB) Viewed 3546 times
Dick joke has expired.
- k1rkyd
- Breadboard Brother
Hey there everyone,
I just want to inform you that i bought some inductors from the thomas organ factory which i had seen in a mister crybaby!
Unfortunately i have found that these inductors havn't worked for me. At least something good came from this because now we have the knowledge that this 250uH inductor from this comapny dont work.
Thanks again for the information anyway though.
K1RKYD
I just want to inform you that i bought some inductors from the thomas organ factory which i had seen in a mister crybaby!
Unfortunately i have found that these inductors havn't worked for me. At least something good came from this because now we have the knowledge that this 250uH inductor from this comapny dont work.
Thanks again for the information anyway though.
K1RKYD
I stepped up on the platform; a man gave me the news; he said "You must be joking son, where did you get those shoes?"
- sinner
- Old Solderhand
Information
- Posts: 4709
- Joined: 06 Nov 2008, 17:16
- Location: ...no more
- Has thanked: 1031 times
- Been thanked: 909 times
- sinner
- Old Solderhand
Information
- Posts: 4709
- Joined: 06 Nov 2008, 17:16
- Location: ...no more
- Has thanked: 1031 times
- Been thanked: 909 times
After a while I see it's not so correct. One resistor value is wrong. Since I've lost all my data after OS crash, I did the layout from basics. For McCoy, and others go heresinner wrote:I believe its correct now, don't thank - it's my duty
- sinner
- Old Solderhand
Information
- Posts: 4709
- Joined: 06 Nov 2008, 17:16
- Location: ...no more
- Has thanked: 1031 times
- Been thanked: 909 times
sinner wrote:Looks like JMI reissued the thing http://www.jmiamplification.com/EFFECTS/wah.htm
...now... I wonder what value of resistor connected to 4uF BP is in the JMI Reissue?
- sinner
- Old Solderhand
Information
- Posts: 4709
- Joined: 06 Nov 2008, 17:16
- Location: ...no more
- Has thanked: 1031 times
- Been thanked: 909 times
Fuck! correction... It looks like RG's schemo is wrong, and 100k resistor is what is it in it. Checked all the gudshots I have and in all I see 100k's
So ones again, new layout plus some of the picts of mine - in progress but soon to be finished. Grey painted enclosure is being made, new 0,22uf 160v caps will be here soon as well (the ones I have, made by the same company is 400v, and physically larger, tooooo large). I decide to use metal film dale's ccf60 series - I love those resistors!! Insteed of styroflex 0,01's I'm going to use Eromark's, no idea what kind of caps are they, but they sound lush, and physically are fine, I'm getting low with those I'm still not sure what to do with the inductor... I'm talking with whipple, but he asking $75 for the close replica.. I thing I'll use regular 500mH whipple at the end of the day...
So ones again, new layout plus some of the picts of mine - in progress but soon to be finished. Grey painted enclosure is being made, new 0,22uf 160v caps will be here soon as well (the ones I have, made by the same company is 400v, and physically larger, tooooo large). I decide to use metal film dale's ccf60 series - I love those resistors!! Insteed of styroflex 0,01's I'm going to use Eromark's, no idea what kind of caps are they, but they sound lush, and physically are fine, I'm getting low with those I'm still not sure what to do with the inductor... I'm talking with whipple, but he asking $75 for the close replica.. I thing I'll use regular 500mH whipple at the end of the day...
- sinner
- Old Solderhand
Information
- Posts: 4709
- Joined: 06 Nov 2008, 17:16
- Location: ...no more
- Has thanked: 1031 times
- Been thanked: 909 times
BTW - mods, is this shouldn't be in ready to build section?