A/DA - Final Phase  [schematic]

Discussion regarding early stompbox technology: 1960-1975 Please keep discussion focused and contribute what info you have...
User avatar
Pokfor
Information
Posts: 10
Joined: 08 Aug 2014, 06:04
my favorite amplifier: Rock Seasons
Location: Russia
Has thanked: 10 times
Been thanked: 13 times

Post by Pokfor »

Thanks for the info, I will try to adjust to these data.
Has received a range narrower than I did. Perhaps the use of phasers will be more comfortable.
I will write after the experiments.

User avatar
Pokfor
Information
Posts: 10
Joined: 08 Aug 2014, 06:04
my favorite amplifier: Rock Seasons
Location: Russia
Has thanked: 10 times
Been thanked: 13 times

Post by Pokfor »

Final VCO tuning frequency from 33kHz to 560kHz. For the convenience of replacing R82 (27k) on the 36k. Also replaced the C10 (1n) to 4n7.

Yazoo55
Breadboard Brother
Information
Posts: 71
Joined: 27 Apr 2008, 11:35
Location: Morpeth, Northumberland, U.K.
Has thanked: 7 times
Been thanked: 9 times

Post by Yazoo55 »

I've just built this and I think I've managed to set the frequency range OK based on the advice here. Do you have any advice on how to set trimpot 1 connected to the intensity pot please?

Post Reply