Trace Elliot VA350

Tube or solid-state, this section goes to eleven!
Post Reply
User avatar
Fender3D
Cap Cooler
Information
Posts: 573
Joined: 08 Aug 2009, 02:40
Location: Helltaly
Has thanked: 121 times
Been thanked: 153 times

Post by Fender3D »

I got this head amplifier to repair.
It had issues in protection circuit block.
I searched the net, asked T.E. for schematic, no way....

So I reversed engineered it.
This schematic is the missing part of the .gif I also attached (sorry for the author, I don't know whoever he is...) for archive purpose

So... enjoy it.
VA350 Schematic.pdf
VA350 schematic
(72.91 KiB) Downloaded 139 times
This is the schematic I found on the net.
VA 350 diagram
VA 350 diagram

User avatar
Jarno
Resistor Ronker
Information
Posts: 358
Joined: 12 Nov 2008, 10:18
my favorite amplifier: Something nice
Completed builds: Alembic-like state-variable and sallen-key filter preamps
Lovepedal Eternity
Phase 100
Brown source
Fuzz Face
Flipster
Alembic F2B (tube preamp)
Opamp and FET buffers
Loads of speakercabinets and ampracks
Busy building a modular synth (ssm2044 vcfs, preamps, ADSR's, VCO's, VCA's)
Tables
Bookshelves
Basses
So many things! :D
Location: Rosmalen, NL
Has thanked: 27 times
Been thanked: 79 times

Post by Jarno »

I had one like this, I think mine was called the VR350. Great amp, loud, clean.
Heavy though, mine was 40kg in a wooden rack case.

Nice work! Scary voltages :-)
"It crackles....., but that's ok"

Post Reply