freestompboxes.org

Hey guys. I was wondering if anyone has an Eagle library part for;

-Dual gang 16mm (standard alpha) pot which is board mounted or which the holes aren't offset (like the ones in the MB library)

-a DPDT switch which is board mounted or where the holes are a bit more spaced out than the on in the MB library.

Thanks in advance!

Might be quicker to edit or make your own from scratch. Here's a tutorial: http://hackaday.com/2016/09/22/making-a ... le-part-1/

FiveseveN wrote:Might be quicker to edit or make your own from scratch. Here's a tutorial: http://hackaday.com/2016/09/22/making-a ... le-part-1/

Interesting. I didn't know you could do this. Nice!

I may just use two regular pots and space them for a dual gang.

The switch is the real pain.

Thanks!

Dual 16mm pots are in the pot lbr, I believe that's a standard library.
There's also a switch library, but there are several footprints, so you might want to dig a bit.