Tap Tempo for pt2399 (with code) [documentation]
Hi Guys! Today we decided to open for builders our Tap Tempo module for pt2399.
You can go and take http://piodfx.com/tap-tempo.php
Enjoy!
Please, don't forget to push the social buttons.
You can go and take http://piodfx.com/tap-tempo.php
Enjoy!
Please, don't forget to push the social buttons.
- Mbas974
- Resistor Ronker
Thanks !
Let me suggest you the next scenario.
Set the delay based on specific tempo : 1/4 ; 3/16 ; etc ( the DIVIDE function in Memory Boy )
You need to add a pot (or better a rotary switch) and upgrade the sketch.
Bye
Let me suggest you the next scenario.
Set the delay based on specific tempo : 1/4 ; 3/16 ; etc ( the DIVIDE function in Memory Boy )
You need to add a pot (or better a rotary switch) and upgrade the sketch.
Bye
- Mbas974
- Resistor Ronker
For the one who have requested, I post my archive since the link above is no longer existing.
Anyway, I never used such TAP tempo.
In the past I bought this : http://uk-electronic.de/onlineshop/prod ... 33ccd68c39
That is an easy way to begin...
Anyway, I never used such TAP tempo.
In the past I bought this : http://uk-electronic.de/onlineshop/prod ... 33ccd68c39
That is an easy way to begin...
- Attachments
-
- TMP-1.0-fin.zip
- Program code
- (2.19 KiB) Downloaded 374 times
-
- TMP-1.0-tap-tempo-pt2399.pdf
- Schematic
- (39.51 KiB) Downloaded 501 times
- DarkRain
- Solder Soldier
Information
Always wandered ... how do you map the value of the pot to actual time, as far as i know there is no relation in the DS.
Best regards,
Gabriel Tudoran
Best regards,
Gabriel Tudoran