From "Electronics & Music Maker", this is a unit that selects the order in which multiple stompboxes are connected between the musician and the amplifier.
The design came from the October 1981 issue of the magazine. Note that rather the magazine issue being a pdf file, the entire issue is in the form of an internet page, the URL of which is on the "Write-up" tab of the attached Spreadsheet. There are a few errors and omissions on the ORIGINAL circuit diagram, which I have, hopefully, corrected.
FX-1 Effects Link
Information
- Posts: 14
- Joined: 10 Jul 2018, 19:42
- my favorite amplifier: Hartke KM-50, for my Mellotron!
- Completed builds: None - so far, despite having a huge amount of components. I've just started building 3 (yes, three) Reverb units that use a PT2399! 3? Yes - one for my Mellotron a 2 for musician friends of mine in Stafford, England. One is a self-trained guitarist and the other is a keyboard whizz!
- Location: Edinburgh, Scotland
- Has thanked: 2 times
- Been thanked: 18 times
- Contact:
I don't have anything to say, so I won't say it!
I can be wrong....
but this circuit is summing in parallel the fx .
.. it is not really the good choice for fx chain
but this circuit is summing in parallel the fx .
.. it is not really the good choice for fx chain