MEC WARWICK 3 BAND EQ RF ISSUE

Pickups, wiring schemes, switch techniques and onboard active electronics for guitars
mistermikev
Breadboard Brother
Information
Posts: 109
Joined: 10 Dec 2008, 15:26
my favorite amplifier: deville 4x10
Completed builds: -modded big muff (russian) w 6way rotary selecting clipping dioes/emitter lift/true bypass/new pots.
-modded ts8 with diodes, 4558chip, 10k/100ohm resistors
-byoc analog chorus-built a two true bypass loop/order switch
-tube crusher = tube screamer + orange squeezer
-booster
-nurse quacky
etc
Has thanked: 2 times
Been thanked: 3 times

Post by mistermikev »

so... thanks to all parties above for schems. this is on my 'must try' list and since I've had some time on my hands this weekend... I did a layout and will wire one up sooner or later. Just wanted to share.

Have checked it 3x (not saying I'm incapable of mistakes!).

My layout is setup to mount the pcb on a push pull. Extra pads around the pot for parallel resistors to bring a 250k to the 100k value.

Image
Image
https://www.dropbox.com/s/0kp86oepx1ug1 ... p.png?dl=0
I have all the parts on the board populated... so all the real work is done... now I just have to get it working.

Post Reply