EMG DG20 (SPC and EXG) schematics etc.  [schematic]

Pickups, wiring schemes, switch techniques and onboard active electronics for guitars and basses
User avatar
bajaman
Old Solderhand
Information
Posts: 4419
Joined: 26 Jun 2007, 21:18
Location: New Brighton, Christchurch, NZ
Has thanked: 494 times
Been thanked: 1802 times

Post by bajaman »

Hi folks
I was recently asked for fab house files for some of these boosters and realised I did not have anything to offer because the original artwork was done in CorelDraw and not a recognised PCB artwork package. I spent a few hours with the excellent Sprint Layout 6.0 ( if you are not familiar with this program I strongly suggest you check it out ;-) ), and now i am happy to post some images for the smd files for the DG20, SPC,and RPC boards as well as through hole versions for SPC and RPC. Most fab houses require gerber files, and these are listed below. I am happy to supply the Sprint Layout 6.0 files upon request - just PM me if you need them. In the meantime here are some gif images and gerber files exported from the Sprint Layout 6.0 files. Kindest regards to all and hope you are getting through this awful seemingly neverending covid pandemic safely :wink:
cheers bajaman
Baja buffered DG20 SPC and EXG smd 130821 top layer.GIF
Baja buffered DG20 SPC and EXG smd 130821 bottom layer.GIF
Baja buffered DG20 SPC and EXG smd 130821 bottom layer.GIF (11.36 KiB) Viewed 2540 times
Baja unbuffered RPC smd 130821 top layer.GIF
Baja unbuffered SPC smd 130821 top layer.GIF
Baja unbuffered RPC 130821 top layer.GIF
Baja unbuffered RPC 130821 bottom layer.GIF
Baja unbuffered SPC 130821 top layer.GIF
Baja unbuffered SPC 130821 bottom layer.GIF
Bajaunbuffered RPC smd 130821.zip
(7.29 KiB) Downloaded 51 times
Baja unbuffered SPC through hole 130821.zip
(9.06 KiB) Downloaded 47 times
Baja unbuffered SPC smd 130821.zip
(6.91 KiB) Downloaded 46 times
Baja unbuffered RPC through hole 130821.zip
(9.38 KiB) Downloaded 52 times
Baja buffered DG20 SPC and EXG smd 130821.zip
(14.81 KiB) Downloaded 50 times
be kind to all animals - especially human beings

User avatar
bajaman
Old Solderhand
Information
Posts: 4419
Joined: 26 Jun 2007, 21:18
Location: New Brighton, Christchurch, NZ
Has thanked: 494 times
Been thanked: 1802 times

Post by bajaman »

Here are a few more ....
Baja buffered SPC smd 130821 top layer.GIF
Baja buffered SPC smd 130821 top layer.GIF (27.66 KiB) Viewed 2482 times
Baja buffered RPC smd 130821 top layer.GIF
Baja buffered RPC smd 130821 top layer.GIF (27.88 KiB) Viewed 2482 times
Baja buffered SPC smd 130821.zip
(7.81 KiB) Downloaded 52 times
Baja buffered RPC smd 130821.zip
(8.17 KiB) Downloaded 54 times
be kind to all animals - especially human beings

User avatar
uberNick
Information
Posts: 1
Joined: 15 Sep 2021, 08:54

Post by uberNick »

Hello guys!! Ive stumbled on this Forum post searching for an solution for a problem with the new DG20.
I want to make my "ULTIMATE" Partcaster with the new DG20 but I plan to replace the switch with 10-Way Freeway Blade Switch...
My problem with it is that the new DG20 has the PCB mounted and i am not that knowledgable in electronics as the EMG instruction specifies that EMG pickups dont need the Groundwiring and the Freeway Switch Wiring diagram has contacts for ground and hot... If its not possible via DG20 PCB, i am willing to buy the pickups and exg and spc separately to do that modification.
I just need your assistance on this matter as you guys are much smarter than me :lol:

Post Reply