Bench Power

Frequently asked questions regarding powering your pedal.
Post Reply
jeffaroo
Posts: 7
Joined: 10 Nov 2012, 08:57

Post by jeffaroo »

Any recomendations for a Bench Power Supply ? dont really want to break the bank, but there is alot of crap out there.
power isnt something you want to f*** with :scratch:

zilla
Posts: 22
Joined: 16 Jul 2012, 05:05
Has thanked: 8 times

Post by zilla »

I was just about to post the same question, but found your post.

I am looking for one, too. Preferably up to 25vdc.

commathe
Breadboard Brother
Posts: 97
Joined: 01 Jul 2013, 23:31
Has thanked: 5 times
Been thanked: 7 times

Post by commathe »

Personally, I just use an adjustable DC wall wart. Then I have a vero-board supply filter with my in and out jacks built on to it (that way I don't have to wire up ground for the jacks every time). It is basically this:

Run Off Grove bread board power module

If you are looking for more control (the kind of stuff a proper bench power supply provides) then you will probably just have to bite the bullet and buy one

triplesevener
Posts: 43
Joined: 28 Mar 2012, 15:00
my favorite amplifier: 1986 Gallien-Krueger 400RB
Completed builds: BYOC 2-knob compressor
Klon Buffer
Devi Ever Ruby, OK, Hyperion
EP-boost->Modded SD1
Meathead
Hunny Bunny
Roger Mayer Voodoo Bass (excellent)
Zendrive
Big Muffs (Russian, P19, Jordan Creator, Jumbo Tonebender)
Lots of other miscellaneous pedals that aren't worth mentionin
Location: MA, US
Has thanked: 7 times
Been thanked: 6 times
Contact:

Post by triplesevener »

I've got a professional lab supply that somebody left on the street! I think mine's 30 volts at 5 amps, which is far more than you'll ever need.

User avatar
Duckman
Opamp Operator
Posts: 1519
Joined: 20 May 2009, 02:45
Has thanked: 257 times
Been thanked: 93 times

Post by Duckman »


Post Reply