Where can I get PCB's made????

Frequently asked question on the subject of designing, creating, producing printed boards, veroboards or perfboads and on point-to-point construction techniques.
User avatar
madbean
Information

Post by madbean »

DaveKerr wrote:It's about time I get off my ass and learn how to use Eagle - I've been half-assing mods, like hanging voltage invertor vero boards off DC jacks and stuffing multiple leads into oversized holes for heat compensation diodes on Fuzz Face boards. Why not go from breadboard straight to something you're not embarrassed to take the cover off?

Shameless plug: you could use this project I posted over the weekend to try your hand at a double sided layout: https://www.freestompboxes.org/viewtopic ... 13&t=12918

The hard stuff is already done....just create a new layout for a double sided board :)

User avatar
jsrfo
Information
Posts: 30
Joined: 23 Feb 2010, 02:36
Been thanked: 6 times

Post by jsrfo »

OK, can't find any freeware out there that converts Express PCB to something Eagle can use, gerbers, etc. Anyone out there know of any software or anyone that converts for a fee? Laen cannot use Express PCB files. Crap...

User avatar
Hides-His-Eyes
Tube Twister
Information
Posts: 1940
Joined: 02 Feb 2010, 12:34
Has thanked: 50 times
Been thanked: 51 times

Post by Hides-His-Eyes »

There's no one click tool. ExpressPCB do this very deliberately.
Testing, testing, won too fwee

Post Reply