How to wire a looper using one switch

All frequent questions on switching: true or not true bypass, transistor-based or mechanical.
Post Reply
User avatar
caspercody
Resistor Ronker
Information
Posts: 388
Joined: 15 Jul 2009, 14:34
Has thanked: 34 times
Been thanked: 48 times

Post by caspercody »

Hello, hope everyone is doing well.

I made a two loop Looper, and I am wondering if anyone can help me to wire this up by using just one switch to switch between the two loops? This would mean that one of the Loops would be active. I have attached a schematic of how I wired up the Looper I have now, just remove loop 3. I would also like to have LED's to indicate which loop is active

Thanks
Rob
Attachments
Capture.PNG

User avatar
plush
Cap Cooler
Information
Posts: 640
Joined: 08 Dec 2015, 09:29
Location: Moscow, Evil Russia
Has thanked: 36 times
Been thanked: 171 times

Post by plush »

caspercody wrote: 06 Nov 2020, 19:13 to wire this up by using just one switch to switch between the two loops?

2 loops, 1 switch

just like in the movie
Attachments
poopyloop.png

User avatar
caspercody
Resistor Ronker
Information
Posts: 388
Joined: 15 Jul 2009, 14:34
Has thanked: 34 times
Been thanked: 48 times

Post by caspercody »

THANKS!!!!!

Post Reply