4th build Devi Ruby

Ok, you got your soldering iron and nothing is going to hold you back, but you have no clue where to start or what to build. There were others before you with the same questions... read them first.
Post Reply
MuzzledAxe
Posts: 26
Joined: 14 Jun 2012, 00:19
Has thanked: 2 times

Post by MuzzledAxe »

Hi guys

This is gonna be my forth build as I always seem to hit problems I am gonna keep a updated thread with photos..

Please jump in with suggestions or point me in the right direction if you see some thing wrong..

This is the layout I am using

http://2.bp.blogspot.com/-R70ESJvzacU/T ... r+Ruby.png

MuzzledAxe
Posts: 26
Joined: 14 Jun 2012, 00:19
Has thanked: 2 times

Post by MuzzledAxe »

Links and Cuts made.....

https://s1060.photobucket.com/albums/t45 ... y%20Build/

I cut the Vero with a craft Knife 13 across 7 down

I first marked out the cuts and did these with a 3mm Drill bit

Then soldered the links at 7 down 5 across and 7 down 9 across

MuzzledAxe
Posts: 26
Joined: 14 Jun 2012, 00:19
Has thanked: 2 times

Post by MuzzledAxe »


MuzzledAxe
Posts: 26
Joined: 14 Jun 2012, 00:19
Has thanked: 2 times

Post by MuzzledAxe »


Post Reply