DOD 230 Photocell?

Frequent question abouts LED and other types of diodes.
Post Reply
mwynwood
Posts: 17
Joined: 11 Oct 2011, 00:51
Location: Australia
Been thanked: 3 times
Contact:

Post by mwynwood »

Hi everyone,
I'm building the DOD 230 from this vero: http://diy-layout.com/67
Image

I'm a little bit confused how to hook up the VTL5C10 or the LED/LDR combination.
The VTL5C10 has 4 legs and I can't really see where they might go on the vero?
Is that what the green lines are about?
If I were to make my own LED/LDR combination, how would that be hooked up?
Thanks for helping out  :D
G'day, I'm Marcusmwynwood.comPictures of my Builds

floris
Resistor Ronker
Posts: 440
Joined: 14 Oct 2007, 13:05
Has thanked: 168 times
Been thanked: 47 times

Post by floris »

The optocoupler should be d1 in the vero but makes no sense to me yet... l'll ask the maker of that vero.

User avatar
Harold
Breadboard Brother
Posts: 77
Joined: 21 Oct 2008, 22:06
Location: The Netherlands
Has thanked: 6 times
Been thanked: 16 times
Contact:

Post by Harold »

The LED of the Optocoupler is depicted as ... LED! The variable resistor part (LDR) is nicely drawn as green wires ;)

The Optocoupler has text on it which side is the LED and which pin is the +. In this case, the Optocoupler should face the vero with the LED-part down, and the + on the second row.


... on a side note: I don't like this noise gate at all. :|
DIY-Layout.com: Online stripboard layouts

daniel.madeireira
Posts: 4
Joined: 28 Mar 2014, 06:07
Been thanked: 2 times

Post by daniel.madeireira »


Post Reply