Page 1 of 1

DOD 230 Photocell?

Posted: 02 Jun 2012, 06:23
by mwynwood
Hi everyone,
I'm building the DOD 230 from this vero: http://diy-layout.com/67
Image

I'm a little bit confused how to hook up the VTL5C10 or the LED/LDR combination.
The VTL5C10 has 4 legs and I can't really see where they might go on the vero?
Is that what the green lines are about?
If I were to make my own LED/LDR combination, how would that be hooked up?
Thanks for helping out  :D

Re: DOD 230 Photocell?

Posted: 04 Sep 2013, 15:34
by floris
The optocoupler should be d1 in the vero but makes no sense to me yet... l'll ask the maker of that vero.

Re: DOD 230 Photocell?

Posted: 04 Sep 2013, 15:50
by Harold
The LED of the Optocoupler is depicted as ... LED! The variable resistor part (LDR) is nicely drawn as green wires ;)

The Optocoupler has text on it which side is the LED and which pin is the +. In this case, the Optocoupler should face the vero with the LED-part down, and the + on the second row.


... on a side note: I don't like this noise gate at all. :|

Re: DOD 230 Photocell?

Posted: 28 Mar 2014, 06:16
by daniel.madeireira