Castledine Electronics - The Wizard  [traced]

General documentation, gut shot, schematic links, ongoing circuit tracing, deep thoughts ... all about boutique stompboxes.
Manfred
Transistor Tuner
Posts: 1120
Joined: 05 Apr 2009, 00:42
Has thanked: 1098 times
Been thanked: 700 times

Post by Manfred »

Schematic and layouts, the capacitor values should be correct now.
WizCorrectedSchematic.JPG
WizCorrectedLayout.JPG
WizSprintLayoutFile.zip
(18.91 KiB) Downloaded 22 times
I cerated a Vero-layout, but it is not applied yet and not verfied until now.
The lot of wire jumper results from the trial to keep the layout small.
WizVeroLayout.jpg
WizLochMasterFile.zip
(147.33 KiB) Downloaded 21 times
WizVeroComponetSide.pdf
(267.32 KiB) Downloaded 22 times
WizVeroBothSides.pdf
(328.06 KiB) Downloaded 25 times
The solder side is folded downwards shown.
WizVeroSolderSide.pdf
(65.59 KiB) Downloaded 23 times
WizVeroSolderSideOriginalSize.pdf
(66.21 KiB) Downloaded 25 times

Manfred
Transistor Tuner
Posts: 1120
Joined: 05 Apr 2009, 00:42
Has thanked: 1098 times
Been thanked: 700 times

Post by Manfred »

A re-examination gave some other resistor values as follows:
R4 old 22k -> new 10k
R5 old 4k7 -> new 3k9
R18 old 22k -> new 10k
R19 old 22k -> new 10k
R20 = 22R added.
WizCorrectedSchematic2.JPG
WizCorrectedLayout.JPG
WizSprintLayout6_FileCorrected.zip
(20.23 KiB) Downloaded 32 times
WizPCBSolderSide.pdf
(4.76 KiB) Downloaded 31 times
WizPCBSolderSideMirrored.pdf
(4.77 KiB) Downloaded 27 times
WizVeroLayoutCorrected.jpg
WizVeroBothSidesCorrected.pdf
(331.29 KiB) Downloaded 29 times
The solder side is folded downwards shown.
WizVeroSolderSideCorrected.pdf
(65.53 KiB) Downloaded 30 times
WizVeroSolderSideCorrectedOriginalSize.pdf
(66.17 KiB) Downloaded 28 times

User avatar
Intripped
Cap Cooler
Posts: 560
Joined: 25 Aug 2009, 02:03
Location: Italy
Has thanked: 695 times
Been thanked: 219 times

Post by Intripped »

hey! :D
..may i ask where did you take these new values from?
have you got the real pedal on your bench?

i can see that the old values of the resistors are coherent with the pics in the previous page, so ...are there 2 versions of this circuit?
would be interesting to determine which is the most recent

thanks again for your work!

Manfred
Transistor Tuner
Posts: 1120
Joined: 05 Apr 2009, 00:42
Has thanked: 1098 times
Been thanked: 700 times

Post by Manfred »

Intripped wrote:hey! :D
..may i ask where did you take these new values from?
have you got the real pedal on your bench?

i can see that the old values of the resistors are coherent with the pics in the previous page, so ...are there 2 versions of this circuit?
would be interesting to determine which is the most recent

thanks again for your work!
No, I have not got the pedal on the bench, I got the information form another source.
I do not know which is the most recent, I guess the second one.
But anyway-the second one is verified.

Blues1911
Posts: 10
Joined: 18 May 2012, 11:47
Has thanked: 5 times
Been thanked: 12 times

Post by Blues1911 »

Manfred wrote: No, I have not got the pedal on the bench, I got the information form another source.
I do not know which is the most recent, I guess the second one.
But anyway-the second one is verified.
Manfred, please notice that C2 value is reported right on the PCB (47uf) but not on the schematic, where is still wrongly noted as 100uf.

Manfred
Transistor Tuner
Posts: 1120
Joined: 05 Apr 2009, 00:42
Has thanked: 1098 times
Been thanked: 700 times

Post by Manfred »

Hi Blues 1911,

thanks for the hint.
Here the corrected Schematic:
WizCorrectedSchematic3.JPG

Post Reply