I hope those pictures are enough. The screw in one of the knobs broke and I cannot unscrew it again so I won't be able to get to the back of the circuit.
Throne Room Pedals - The Coming Messiah v2 guts
-
geiristudio
- Breadboard Brother
Here's the Throne Room Pedals - The Coming Messiah v2, which is now called The Atlantis (might have a slightly modified circuit). I really need this traced.
I hope those pictures are enough. The screw in one of the knobs broke and I cannot unscrew it again so I won't be able to get to the back of the circuit.
I hope those pictures are enough. The screw in one of the knobs broke and I cannot unscrew it again so I won't be able to get to the back of the circuit.
-
geiristudio
- Breadboard Brother
Sorry about those enormous photos!
I forgot about this and sorry for my crappy drawing hah!
I forgot about this and sorry for my crappy drawing hah!
-
rocklander
- Old Solderhand
Information
- Posts: 2726
- Joined: 18 Apr 2008, 11:33
- my favorite amplifier: my jansen bassman 50
- Completed builds: rebote 2.5; supreaux; odie; heartthrob tremolo; ross phaser; dr. boogey; thor; baja black toast; slow gear attack, rebote, tri-vibe, small clone, little angel, magnus modulus, echo base, hex fuzz, big muff, 22/7.
- Location: Rotorua, New Zealand
- Has thanked: 1406 times
- Been thanked: 231 times
- Contact:
I don't know crap about crap, but that parts list looks pretty tube screamery to me?
world's greatest tautologist ...in the world
Ronsonic wrote:...the lower the stakes the more vicious the combat.
atreidesheir wrote:He should be punched in the vagina.
-
geiristudio
- Breadboard Brother
Hmm doesn't sound anything like a TS to me though.
-
atreidesheir
- Diode Debunker
son of screamer without 1n34a diodes on one side(the asymmetrical pair I guess). This one just has mundane silicon diodes.
call it "son of perdition" - 2 Thessalonians 2:3-4 9 (refers to antichrist) --more rocknroll sounding. I do not find soft clipping very satanic though.
The robin trower pedal from fulltone is similar on the inside and does not sound like a TS either, but it mostly is (symmetrical clipping on that one though with one side schottky and the other 4001s).
call it "son of perdition" - 2 Thessalonians 2:3-4 9 (refers to antichrist) --more rocknroll sounding. I do not find soft clipping very satanic though.
The robin trower pedal from fulltone is similar on the inside and does not sound like a TS either, but it mostly is (symmetrical clipping on that one though with one side schottky and the other 4001s).
"Contemplate it - on the tree of woe." :Thulsa Doom
-
J0K3RX
- Degoop Doctor
Put some lines on this paper and I will have you a layout by tonight with on-board pots, switches etc...geiristudio wrote:Sorry about those enormous photos!
I forgot about this and sorry for my crappy drawing hah!
[ Image ]
I already have it about half way done just need to verify some traces...
-
geiristudio
- Breadboard Brother
Thanks guys! So the picture that shows the back seems to cover almost everything I think, right? There's just a few lines on the top layer that need verification? I'll see if I can do something later today.
I was afraid it was a TS variant but damn it sounds really really good, I must admit!
I was afraid it was a TS variant but damn it sounds really really good, I must admit!
-
atreidesheir
- Diode Debunker
Most of them do. whether they excite us or not. I have to admit, my disdain for them is purely a technical point.geiristudio wrote: I was afraid it was a TS variant but damn it sounds really really good, I must admit!
"Contemplate it - on the tree of woe." :Thulsa Doom