Lovetone - Wobulator schematic [traced]
Although posted before....just for getting a nice collection here
Still hoping for the ?Flanger....
Still hoping for the ?Flanger....
- Attachments
-
- Wobulator_v3.pdf
- (227.48 KiB) Downloaded 223 times
- Dirk_Hendrik
- Old Solderhand
Information
Hey Markus!
Ended up here too huh? Good to see you!
Ended up here too huh? Good to see you!
- briggs
- Tube Twister
Information
Hey Timm,tuemmueh wrote:Hi markus!
What about the layout? IIRC somebody was working on one ... Do you know the status of the project?
Cheers ~ Timm
I'm sorry, I just realised that there were some efforts but I did'nt follow the thread for quite some time.
Cheers,
Markus
Hi Timm
I was the guy who was working on a layout and produced the first prototype. The schem given by Markus has been confirmed and works in "real life" my layout (over at diystompboxes) works but there is tick which this circuit suffers from. The layout is not optimised to reduce tick (it was my first ever layout!) so all the information is there to build yourself one. When I get time i was going to write up a project file for it so it has information for the types and values of components that I used.
Have fun, if you run into any problems give me a shout on either forum.
Cheers
Shed
I was the guy who was working on a layout and produced the first prototype. The schem given by Markus has been confirmed and works in "real life" my layout (over at diystompboxes) works but there is tick which this circuit suffers from. The layout is not optimised to reduce tick (it was my first ever layout!) so all the information is there to build yourself one. When I get time i was going to write up a project file for it so it has information for the types and values of components that I used.
Have fun, if you run into any problems give me a shout on either forum.
Cheers
Shed
- modman
- a d m i n
Information
- Posts: 4898
- Joined: 19 Jun 2007, 16:57
- Has thanked: 4411 times
- Been thanked: 2139 times
Please, support freestompboxes.org on Patreon for just 1 pcb per year! Or donate directly through PayPal
- LaceSensor
- Cap Cooler
that might be my photo...hmm?
anyway, this has been reversed by a couple folks already... traces, single side etch and double side Oshpark projects are out in the public domain
the big problem is getting the right LED / LDR combo
anyway, this has been reversed by a couple folks already... traces, single side etch and double side Oshpark projects are out in the public domain
the big problem is getting the right LED / LDR combo
- gigelmargel
- Resistor Ronker
Hello,LaceSensor wrote:that might be my photo...hmm?
anyway, this has been reversed by a couple folks already... traces, single side etch and double side Oshpark projects are out in the public domain
the big problem is getting the right LED / LDR combo
Where I can find a PCB for Wobulator? I searched, but with no luck
Thank you very much!
- marmaliser
- Breadboard Brother
- gigelmargel
- Resistor Ronker
Thank you very much mamaliser!!!marmaliser wrote:Check the projects here http://www.madbeanpedals.com/forum/inde ... ic=17402.0
- LaceSensor
- Cap Cooler
note my point above about the correct LED and LDR
I made the wobulator on the PCB project here: https://oshpark.com/shared_projects/lg94calD
and it doesnt sound nearly as good as my real unit...
I made the wobulator on the PCB project here: https://oshpark.com/shared_projects/lg94calD
and it doesnt sound nearly as good as my real unit...