Earthquaker Devices - Talons

zedsnotdead · Post by **zedsnotdead** » 28 Feb 2015, 10:22

On bass guitar also?

johnk · Post by **johnk** » 28 Feb 2015, 16:39

andregarcia57 · Post by **andregarcia57** » 28 Feb 2015, 18:44

OSHPARK file-based layout storyboardist
I made some minor changes in layout. I prefer lying electrolyte.
unchecked.

johnk · Post by **johnk** » 01 Mar 2015, 04:17

got mine all boxed up today. it would've been a lot easier to wire up with board mounted pots but it sounds great just the same. I also added a relayed true bypass.

zedsnotdead · Post by **zedsnotdead** » 01 Mar 2015, 11:31

Holy 5hit John!! That's awesome!!!

Did you paint the enclosure yourself?
How did you get that image on the enclosure? It's the same as the original talons!

Good job my friend!

andregarcia57 · Post by **andregarcia57** » 01 Mar 2015, 14:00

johnk wrote:got mine all boxed up today. it would've been a lot easier to wire up with board mounted pots but it sounds great just the same. I also added a relayed true bypass.

[ Image ]

[ Image ]

hello beautiful Mount.
the relay are you using this?

johnk · Post by **johnk** » 01 Mar 2015, 17:16

zedsnotdead wrote:Holy 5hit John!! That's awesome!!!

Did you paint the enclosure yourself?
How did you get that image on the enclosure? It's the same as the original talons!

Good job my friend!

thanks.
it's just a powder coated translucent gold enclosure with a decal and 4 coats of clear over it.

johnk · Post by **johnk** » 01 Mar 2015, 17:23

andregarcia57 wrote:
hello beautiful Mount.
the relay are you using this?

yes, but it's modified to use a different, smaller relay.

Visualdistortion · Post by **Visualdistortion** » 01 Mar 2015, 22:29

johnk wrote:got mine all boxed up today. it would've been a lot easier to wire up with board mounted pots but it sounds great just the same. I also added a relayed true bypass.

[ Image ]

[ Image ]

Really great, what brand of decal and clear coat did you use? I will love finish my pedal like this.

andregarcia57 · Post by **andregarcia57** » 01 Mar 2015, 22:34

Relay

zedsnotdead · Post by **zedsnotdead** » 02 Mar 2015, 00:20

You know what would be really cool?
Designing a relay PCB that could be used with Moment-spdt pcb-mounted switches like these:

or these dpdt:

That would be uber cool!

BTW andregarcia, where can I find your design in OSH site?

andregarcia57 · Post by **andregarcia57** » 02 Mar 2015, 00:54

zedsnotdead wrote:You know what would be really cool?
Designing a relay PCB that could be used with Moment-spdt pcb-mounted switches like these:
[ Image ]

or these dpdt:
[ Image ]

That would be uber cool!

BTW andregarcia, where can I find your design in OSH site?

thanks to johnk !

https://oshpark.com/shared_projects/UwIJC5aJ

johnk · Post by **johnk** » 02 Mar 2015, 01:10

keep in mind that the staus LED on this one (and the one that I posted above) is actually reversed like this:

johnk · Post by **johnk** » 02 Mar 2015, 01:59

Visualdistortion wrote: Really great, what brand of decal and clear coat did you use? I will love finish my pedal like this.

any good clear injet decal paper will work (I used VitaCal) and then used nitro lacquer over it, shot with a spray gun.

andregarcia57 · Post by **andregarcia57** » 04 Mar 2015, 03:24

osh park Talons

https://oshpark.com/shared_projects/KSVbsYqn

zedsnotdead · Post by **zedsnotdead** » 30 Apr 2015, 17:43

@andregarcia

have you read my message about the missing link? Havent heard from you...

There is a missing link on your PCB (OSHPark), one side of the clipping led pair is not connected to anything.
Cheers!

It's easy to overcome this, just solder a piece of wire on the back of the PCB linking 2 points, but I think I should mention it.

andregarcia57 · Post by **andregarcia57** » 30 Apr 2015, 17:58

zedsnotdead wrote:@andregarcia

have you read my message about the missing link? Havent heard from you...

There is a missing link on your PCB (OSHPark), one side of the clipping led pair is not connected to anything.
Cheers!

It's easy to overcome this, just solder a piece of wire on the back of the PCB linking 2 points, but I think I should mention it.

hello ...
I think in the drive potentiometer, there really is no connection of the pins

mmolteratx · Post by **mmolteratx** » 30 Apr 2015, 18:25

zedsnotdead wrote:You know what would be really cool?
Designing a relay PCB that could be used with Moment-spdt pcb-mounted switches like these:
[ Image ]

or these dpdt:
[ Image ]

That would be uber cool!

BTW andregarcia, where can I find your design in OSH site?

I did this one a long time ago. Meant for a 1590B, but you can fit it in most enclosure sizes with a bit of cleverness.

https://oshpark.com/shared_projects/yQKC4dyx

zedsnotdead · Post by **zedsnotdead** » 30 Apr 2015, 18:33

It's not the drive pot. That pot has pin3 unconnected, like in the schematic, and it's correct.

I am talking about the led pair.
Check the red line on the following image. That's the missing link.

: Default.png (6.65 KiB) Viewed 875 times

zedsnotdead · Post by **zedsnotdead** » 30 Apr 2015, 18:38

mmolteratx wrote: I did this one a long time ago. Meant for a 1590B, but you can fit it in most enclosure sizes with a bit of cleverness.

https://oshpark.com/shared_projects/yQKC4dyx

Brilliant!!!!

Tks a lot mmolteratx!!

Earthquaker Devices - Talons [traced]