Earthquaker Devices - Talons  [traced]

General documentation, gut shot, schematic links, ongoing circuit tracing, deep thoughts ... all about boutique stompboxes.
Post Reply
User avatar
mmolteratx
Degoop Doctor
Information
Posts: 508
Joined: 19 Dec 2009, 01:50
Has thanked: 93 times
Been thanked: 619 times

Post by mmolteratx »

zedsnotdead wrote:
mmolteratx wrote: I did this one a long time ago. Meant for a 1590B, but you can fit it in most enclosure sizes with a bit of cleverness.

https://oshpark.com/shared_projects/yQKC4dyx
Brilliant!!!! :applause:
Tks a lot mmolteratx!!
Yea, no problem. Here's the schem.
Attachments
Relay Schem.png
Top
User avatar
TageG
Information
Posts: 1
Joined: 12 Sep 2014, 20:55
Has thanked: 1 time

Post by TageG »

mmolteratx wrote:
zedsnotdead wrote:
mmolteratx wrote: I did this one a long time ago. Meant for a 1590B, but you can fit it in most enclosure sizes with a bit of cleverness.

https://oshpark.com/shared_projects/yQKC4dyx
Brilliant!!!! :applause:
Tks a lot mmolteratx!!
Yea, no problem. Here's the schem.

Am I safe to assume this uses a latching stomp switch or can it be used with a momentary switch?
Top
User avatar
mmolteratx
Degoop Doctor
Information
Posts: 508
Joined: 19 Dec 2009, 01:50
Has thanked: 93 times
Been thanked: 619 times

Post by mmolteratx »

TageG wrote:
mmolteratx wrote:
zedsnotdead wrote:
mmolteratx wrote: I did this one a long time ago. Meant for a 1590B, but you can fit it in most enclosure sizes with a bit of cleverness.

https://oshpark.com/shared_projects/yQKC4dyx
Brilliant!!!! :applause:
Tks a lot mmolteratx!!
Yea, no problem. Here's the schem.

Am I safe to assume this uses a latching stomp switch or can it be used with a momentary switch?
Momentary only.
Top
Post Reply

Return to “Boutique Stompboxes dissected...”