Re: Fortin Zuul
Posted: 12 Aug 2019, 18:23
He doesn't have them anymorecaspercody wrote:I bought mine from PedelPCB
Page 3 of 3
Re: Fortin Zuul
Posted: 10 Nov 2019, 16:26
Being in need of a noise gate I compared the Decimator and the Zuul seeing that the latter has fewer parts and better critiques I wanted to have a go at it. The THAT4301 seems to be obsolete and replaced by the THAT4305, so I modified the schematic on basis of this transition document
https://www.profusionplc.com/images/dat ... -guide.pdf
The THAT4305 is only available in QSOP package, so it will be PITA to hand solder it.
The internal OPamps need to be preplaced by external ones. As the circuit needs 5 OPamps I chose a TL074 and a TL072 leaving one free which I probably will incorporate as a splitter to forgo the necessity of an external splitter for the “key” input.
https://www.profusionplc.com/images/dat ... -guide.pdf
The THAT4305 is only available in QSOP package, so it will be PITA to hand solder it.
The internal OPamps need to be preplaced by external ones. As the circuit needs 5 OPamps I chose a TL074 and a TL072 leaving one free which I probably will incorporate as a splitter to forgo the necessity of an external splitter for the “key” input.
Re: Fortin Zuul
Posted: 11 Nov 2019, 16:48
Re: Fortin Zuul
Posted: 21 Oct 2020, 11:43
Perhaps I missed it early in the thread, but- Has anyone made a PCB layout for home etching?
Re: Fortin Zuul
Posted: 01 Feb 2022, 02:55
Has anyone made a PCB layout?
Re: Fortin Zuul
Posted: 15 Oct 2022, 21:24
Just gonna leave this here.