Laney Black Country Customs Tony Iommi Signature Boost Pedal
- bugg
- Breadboard Brother
I have one sitting here right now.
I'm right in the middle of a construction project so it's going to be a few days before I can get to it, but I'm on it.
I'm right in the middle of a construction project so it's going to be a few days before I can get to it, but I'm on it.
PedalPCB.com - http://www.pedalpcb.com/
- Ripthorn
- Breadboard Brother
Information
Leave it to bugg to give us all the good things! There's a reason my pedalboard has only once commercial pedal on it...
Exact Science is Not an Exact Science - Nikola Tesla in The Prestige
https://scientificguitarist.wixsite.com/home
https://scientificguitarist.wixsite.com/home
- rmroza
- Breadboard Brother
Yep. I've side-by-sided them....like the Friedman BE-OD and absolutely no difference, so sell off my commercial stuff. No reason for $150-300 pedal, when I can build it for $35-50 and just my labor time to build it!
- Ichabod_Crane
- Resistor Ronker
Did you build the Friedman BE-OD with a PedalPCB board?
I heard it's a bit noisier than other high gain pedals. Actually, it was a veroboard layout, maybe that makes some difference.
I heard it's a bit noisier than other high gain pedals. Actually, it was a veroboard layout, maybe that makes some difference.
- rmroza
- Breadboard Brother
I've made both the BE-OD (Thermionic Distortion) and 2 channedl "Thermionic Dexluxe Distortion".
I've tested them both side-by-side with their Friedman counterparts. NO difference, NO, mine were not noisy. Quiet as can be!!
I've tested them both side-by-side with their Friedman counterparts. NO difference, NO, mine were not noisy. Quiet as can be!!
- rmroza
- Breadboard Brother
Month and a half! Any updates?? Don't mean to be a pest. Just asking because it was communicated on the bench, so figures it wouldn't take long. I have one and had one on the bench and if knew was going to take a long while, could have helped reverse it myself!
Looking forward and hope to see the design in the near future.
Looking forward and hope to see the design in the near future.
- jhergonz
- Breadboard Brother
i think you need to wait in pedalpcb for it be posted.rmroza wrote: ↑14 Oct 2020, 12:50 Month and a half! Any updates?? Don't mean to be a pest. Just asking because it was communicated on the bench, so figures it wouldn't take long. I have one and had one on the bench and if knew was going to take a long while, could have helped reverse it myself!
Looking forward and hope to see the design in the near future.
- andregarcia57
- Cap Cooler
is it based on transistor itself or ge?
- bugg
- Breadboard Brother
The trace is done, it just needs to be verified.
If you saw how many things were "on the bench" you'd understand why it takes a while.
I have a ton of loaner pedals here and I have to prioritize by what has to go back to it's owner first.
All opamp, not a transistor in the thing.
PedalPCB.com - http://www.pedalpcb.com/
- Ichabod_Crane
- Resistor Ronker
- rmroza
- Breadboard Brother
Understood. Just didn't know if this was a dead issue or a go.bugg wrote: ↑18 Oct 2020, 18:39The trace is done, it just needs to be verified.
If you saw how many things were "on the bench" you'd understand why it takes a while.
I have a ton of loaner pedals here and I have to prioritize by what has to go back to it's owner first.
All opamp, not a transistor in the thing.
No transistors....interesting!!!
- soulsonic
- Old Solderhand
Information
It's not too hard to do an opamp boost with a Rangemaster-like tone. I've done it.
"Analog electronics in music is dead. Analog effects pedal design is a dead art." - Fran
- Ichabod_Crane
- Resistor Ronker
Yes, it's possible, indeed.
I always thought it was a more classic design, a kind of replica with some additions.
I always thought it was a more classic design, a kind of replica with some additions.
Hi!
Has it been verified yet, bugg?
I´m very curious, the schematic would be highly appreciated! Thanks a lot!
Has it been verified yet, bugg?
I´m very curious, the schematic would be highly appreciated! Thanks a lot!
- bugg
- Breadboard Brother
The schematic has been verified, I'll get it posted as soon as possible.
https://www.pedalpcb.com/product/pcb357/
https://www.pedalpcb.com/product/pcb357/
PedalPCB.com - http://www.pedalpcb.com/