Barber Gain Changer SR [traced]

General documentation, gut shot, schematic links, ongoing circuit tracing, deep thoughts ... all about boutique stompboxes.
Post Reply
User avatar
Posts: 4
Joined: 20 May 2020, 01:39
Been thanked: 4 times

Post by cdwillis »

I hope I'm doing this right. I checked the components in my recently acquired Gain Changer SR (PCB is labeled SR and V4) against a V2 gutshot found online and the 2012 schematic on Barber's site to find the component changes for the SR. I'll list only the components that have been tweaked:

Schematic Value | SR V4 Value

Input Cap:
.056uf | .022uf

Tone Section:
8.2k | 12k
16k | 27k
100k | 75k
3.3k | 3k

Second Op Amp:
7.5k | 6.2k
22k | 30k

All the other values are the same as the schematic.

Post Reply