Zvex - Box of Metal [traced]
Information
The Kokbox has been updated to Rev.2. A better layout, on my part.
Doc is 300 DPI.
PnP image is 600 DPI.
Doc is 300 DPI.
PnP image is 600 DPI.
- pandadandan
- Breadboard Brother
I believe he's asking for which trannies are used in the noise gate. The layouts here do not include the noise gate section of the pedal. Please try to be less antagonistic in your first ever post.Wilburger wrote:It's clearly stated in the parts list.....
BS170..
- quaternotetriplet
- Resistor Ronker
I agree.
- culturejam
- Old Solderhand
Information
Set the image to 300dpi.kev93_10 wrote:What are the dimensions of this PCB?
When I look at the PNP image it's MASSIVE!
K
- culturejam
- Old Solderhand
Information
- rasta_maleek
- Resistor Ronker
hi all from spain, i´m nebie in this themes about diy, i´n try to make this box of metal clone and doesn´t work, i dont know what the matter, only that, doesn´t sound when is switched on, it would be for the bs170?, the version that i´m trying doesn´t pint in the surface bs170p, any etch this layout? or can ay help me in this proyect.
thanks.
sorry for my english, i´m spanish.
thx´n´bye
thanks.
sorry for my english, i´m spanish.
thx´n´bye
Information
- Posts: 11
- Joined: 29 Aug 2008, 15:29
Hi everybody,
I built this off of Madbeans v1 layout (actually from a PCB I bought from him, thanks!). I'm getting less then unity volume out of it and I can't hear a difference when I adjust the trimpot, but all of the other knobs seem to be working as they should and the distortion sound seems about right. Any ideas of what I could have done wrong?
Thanks!
I built this off of Madbeans v1 layout (actually from a PCB I bought from him, thanks!). I'm getting less then unity volume out of it and I can't hear a difference when I adjust the trimpot, but all of the other knobs seem to be working as they should and the distortion sound seems about right. Any ideas of what I could have done wrong?
Thanks!
- rasta_maleek
- Resistor Ronker
i think that this post is forgotten, i did some new layout for 9mm pots, but it´s not revised, if someone wants to revised, this is the layout
can somebody told me how i can print the layout in the correct size? i dont know how i could set the layout at 300dpi. or could somebody make a document with the layout in there in correct size for print?madbean wrote:The Kokbox has been updated to Rev.2. A better layout, on my part.
Doc is 300 DPI.
PnP image is 600 DPI.
- rasta_maleek
- Resistor Ronker
i have some other layouts, one is with a sistem gate of other pedal, but this distorsion doesn´t work finelly, maybe the gate works on your proyect snafux
- Attachments
-
- box of metal with gate II.pdf
- (232.52 KiB) Downloaded 975 times