NIck Greer - Green Giant
- PurplePeopleEater
- Resistor Ronker
Thanks - great work ! I couldn't read the value that you've written on the "Clean Mix" knob (is it 2M ?)- but I did a bit cleaner schematic for you. It's yet another lightly modified Electra. If you can let me know the Clean Mix value I can add it to the schematic. Please check the schematic for errors and let me know if you see any
- Attachments
-
- NICK GREER GREEN GIANT.GIF (9.33 KiB) Viewed 2831 times
- ShortScaleMike
- Resistor Ronker
Information
Looks like B25K to me.
- soulsonic
- Old Solderhand
Information
Let's see, we have the YAFF and the YATS. I guess now we have the YAME;
Yet Another Modified Electra.
Is it built well?
Yet Another Modified Electra.
Is it built well?
"Analog electronics in music is dead. Analog effects pedal design is a dead art." - Fran
it is B25K. thanks for the schematic - looks great. re: build - it is point to point on perf board.
To me it looks more like a modified COT50.soulsonic wrote:Yet Another Modified Electra.
Drop the diodes, add a tone control, combine both and 3 new NG pedals are born.
BTW: Somebody got a clou where I can find the prices for this stuff on the NG-site?
JHS
- PurplePeopleEater
- Resistor Ronker
The COT is a modified Electra as well.JHS wrote:To me it looks more like a modified COT50.soulsonic wrote:Yet Another Modified Electra.
Drop the diodes, add a tone control, combine both and 3 new NG pedals are born.
BTW: Somebody got a clou where I can find the prices for this stuff on the NG-site?
JHS
There are a couple versions of the Electra schematic on the web, but this one is one of the oldest.
Look familiar ?
Greer prices -
http://www.pedalspluseffectswarehouse.c ... _s/100.htm
http://www.stevesmusiccenter.com/NickGreer.html
http://www.pedalgeek.com/cgi-bin/new_sh ... d=link--ng
Last edited by PurplePeopleEater on 05 Jan 2009, 15:40, edited 1 time in total.
- Mr. G.
- Resistor Ronker
Information
- Posts: 384
- Joined: 03 Jul 2008, 19:32
- my favorite amplifier: Undecided
- Completed builds: 3-loop + tuner out TB loop pedal
Eternity overdrive (Deaj perf layout)
YATS (many)
BOR
DLS
COT (Briggs mods)
Crunchbox
SHO (several)
Fuzz Factory
Several LM386 based distortions - Location: Nova Scotia, Canada
- Has thanked: 1 time
- Been thanked: 9 times
http://www.pedalspluseffectswarehouse.c ... _s/100.htmJHS wrote:BTW: Somebody got a clou where I can find the prices for this stuff on the NG-site?
JHS
Not the NG site, but it has prices.
- PurplePeopleEater
- Resistor Ronker
Here's the updated schematic. Thanks again for the info !samhambone wrote:it is B25K. thanks for the schematic - looks great. re: build - it is point to point on perf board.
BTW - IIRC, the "Black Fuzz" is basically the same as this minus the 25k "Clean Mix" pot. (IOW, it's basically a stock Electra.
- Attachments
-
- NICK GREER GREEN GIANT.GIF (9.37 KiB) Viewed 2551 times
So far my anlalysis for the NG stuff:
Sonic boom = stock LBP-1 with 5088,
Sonic boom + = above with guitar tone control at the output
Black Fuzz = sonic boom with 2 914 clipping diodes at the output.
Black Fuzz custom = BF with switchable guitar tone control at the output
Green Giant = Black Fuzz but circuit with current FB instead of voltage FB
Relic Drive = TS-clone
The rest? Guess what it is cloned/copied from.
BTW: actual prices for the EH LPB-1 are about 50$
JHS
Sonic boom = stock LBP-1 with 5088,
Sonic boom + = above with guitar tone control at the output
Black Fuzz = sonic boom with 2 914 clipping diodes at the output.
Black Fuzz custom = BF with switchable guitar tone control at the output
Green Giant = Black Fuzz but circuit with current FB instead of voltage FB
Relic Drive = TS-clone
The rest? Guess what it is cloned/copied from.
BTW: actual prices for the EH LPB-1 are about 50$
JHS