Behringer Chorus Troubleshoot

Forum dedicated to helping people debug and troubleshoot non-functional pedals or builds. Please use an clear and informative title, indicating circuit and basic problem. Don't forget to mark the issue as fixed if this is the case.
Post Reply
User avatar
the_ungod
Information
Posts: 46
Joined: 03 Jan 2008, 16:12
Has thanked: 1 time
Been thanked: 7 times

Post by the_ungod »

Hi Guys,

I have a Behgringer Chorus pedal.
When i connect it, the guitar sound passes through ok.
When i turn it on, the led lights up but the sound remains the same. There no audible change or effect, just clean sound.
Anyone know whats can it be?

Thanks
Top
User avatar
The G
Grease Monkey
Information
Posts: 561
Joined: 21 Jun 2009, 11:43
Location: Bucharest, Romania
Has thanked: 408 times
Been thanked: 290 times

Post by The G »

You should provide more information. At least the full name of the pedal and the schematic or a link to it.
Other than that, audio probing can walk you a long way towards the fix.
Top
User avatar
the_ungod
Information
Posts: 46
Joined: 03 Jan 2008, 16:12
Has thanked: 1 time
Been thanked: 7 times

Post by the_ungod »

HI... Sorry!
Its a UC200. It has OUT A and OUT B. I tried both nut just clean sound.
Perhaps it may be something wrong with the switching part.
The pedal, apart from the electrolytics eits all smd's
Top
Post Reply

Return to “Pedal Debugging & Troubleshooting Support”