The PCB Drill Topic
Hi guys,
Did some search and found no answers so I’m opening a topic, sorry if the info is out there.
I’d love to know your recommendations on tools you use to drill the pcbs. Is there any specific tool I can get?
I’ve been using drills intended for other uses, as I’ve been doing mainly fuzzes this was ok, but when you have more than a couple dozen holes, this is a real pain. I mean, for a rangemaster I could even do it by hand, but for a Memory Man? No way!!. So I’m sure there’s PCB drills out there, but have no experience so I’d love to spoil your know how
What do you use? Where can I buy it?...
Thanks!
Did some search and found no answers so I’m opening a topic, sorry if the info is out there.
I’d love to know your recommendations on tools you use to drill the pcbs. Is there any specific tool I can get?
I’ve been using drills intended for other uses, as I’ve been doing mainly fuzzes this was ok, but when you have more than a couple dozen holes, this is a real pain. I mean, for a rangemaster I could even do it by hand, but for a Memory Man? No way!!. So I’m sure there’s PCB drills out there, but have no experience so I’d love to spoil your know how
What do you use? Where can I buy it?...
Thanks!
- mysticwhiskey
- Solder Soldier
For the past few years I've been using a standard mid-size drill press with 0.8mm bits with no problems. I've recently started using a Dremel with the drill press accessory, which results in cleaner holes - probably due to the higher speed of the Dremel which matches that required by the small bits.
- RnFR
- Old Solderhand
Information
yeah, the dremel withe the mini press works well. larger drill presses work fine as well though, and you can drill enclosures.
"You've converted me to Cubic thinking. Where do I sign up for the newsletter? I need to learn more about how I can break free from ONEism Death Math." - Soulsonic
Blog-APOCALYPSE AUDIO
Blog-APOCALYPSE AUDIO
- lolbou
- Old Solderhand
+1 for this.RnFR wrote:yeah, the dremel withe the mini press works well.
I wouldn't consider using mine for PCBs. But definitely does the job for enclosures.RnFR wrote: larger drill presses work fine as well though, and you can drill enclosures.
- Are you a mod or a rocker?
- Uh, no, I'm a mocker.
- Uh, no, I'm a mocker.
- Duckman
- Opamp Operator
+1. I use something similar to the picture with total successRnFR wrote: larger drill presses work fine as well though, and you can drill enclosures.
- Attachments
-
- KW1500407.jpg (6.07 KiB) Viewed 3620 times
Thanks pals, I think I'll get myself a dremel, I got a big drill that's good for boxes, but a pain in the back (literal) for pcbs.
Hi, if anybody cares, I got the dremel and… total success. So recommended as a lightweight and space saving solution