Tube Box That authentic Valve sound Elektor 2002

pedalgrinder · Post by **pedalgrinder** » 26 Oct 2011, 08:50

Hello Fellow Pedalologist's

Here's one that apparantley has that all allusive and sweet Tube sound. Seems interesting enough. If you build it please let me know what its like. There is a full write up on how they achieve this so i will let all of you be the judge. Please enjoy and have fun!

Tube Box Valve Sound page 1.pdf: (642.61 KiB) Downloaded 632 times

Tube Box Valve Sound page 2.pdf: (156.89 KiB) Downloaded 568 times

Tube Box Valve Sound page 3.pdf: (477.01 KiB) Downloaded 480 times

Tube Box Valve Sound page 4.pdf: (391.39 KiB) Downloaded 417 times

teemuk · Post by **teemuk** » 26 Oct 2011, 15:09

The author has obviously been studying his Fender amps.

mich · Post by **mich** » 26 Oct 2011, 18:03

I like that tone stack control set up with the dual pot and switch boosting / cutting the mids ... looks neat to me. I assume though that this has been done before, huh

carlosjofernandez · Post by **carlosjofernandez** » 03 Jan 2014, 07:07

I have built it. The effect is a mixture between an amp simulator( like Dr boogie) with a cab simulator. The sound of the effect is fit to directly record in a PC . It simulates the sound of an amp with a mic. It sounds REALLY good, I recommend it.

atreidesheir · Post by **atreidesheir** » 03 Jan 2014, 21:37

"The small dimension of the circuit board" lead to a high parts density. There is an understatement.

Fredenando · Post by **Fredenando** » 03 Jan 2014, 22:40

http://www.gtlab.net/gtlab2/filemanager ... _solid.pdf

teemuk · Post by **teemuk** » 06 Jan 2014, 23:47

Zombie thread returns.

http://support.fender.com/schematics/gu ... ematic.pdf

okgb · Post by **okgb** » 07 Jan 2014, 01:06

I appreciate the description, I'd build one if a pcb were available