Frequently asked question on transistors: types, substitutions, how to test, use and misuse them.
- Resistor Ronker
- Posts: 339
- Joined: 22 Sep 2007, 02:24
- Been thanked: 38 times
atreidesheir wrote:Could I get a similar effect with a 2n3440 low gain (@50hfe) silicon transistor with a 1n34a tied to the base and collector to simulate leakage?
Probably. I've tried it and this reintroduces the temperature drift to an otherwise-temperature-immune silicon device. I posted this in other fora at some point.
It doesn't do much except introduce leakage, but that's good for those pedals that are otherwise leakage-biased. It fakes yet one more characteristic.
For faking the noise that surface contamination gives, there are other tricks as well.
- Diode Debunker
- Posts: 747
- Joined: 27 Apr 2010, 00:56
- my favorite amplifier: thd univalve
- Location: Nashville
- Has thanked: 444 times
- Been thanked: 42 times
"Contemplate it - on the tree of woe." :Thulsa Doom
- Posts: 15
- Joined: 15 Oct 2010, 19:31
I've been meaning to build mictester's buzzaround-alike (https://www.freestompboxes.org/viewtopic ... ound+alike
) for quite some time now, but sourcing the Ge-transistor somehow held me back (I don't like paying shipping costs for just a single part). The solution of piggybacking Si-transistors came to my mind, not sure if it was because D-Day mentioned he built his buzzaround-alike this way in mictester's thread, or because I stumbled upon the piggybacking thread separately... anyway, the Ge-transistor in the buzzaround-alike is supposed to be leaky, so I'm wondering if piggybacking the Si-transistors like this https://www.freestompboxes.org/viewtopic ... 60#p215212
is a drop-in replacement, or if any additional modifications are necessary.