Need two Eagle library components.

Digital tools for electronic work: software for pcb design, schematic drawing, circuit simulation, parts inventory tools, ...
Post Reply
diocide
Posts: 2
Joined: 15 Jul 2015, 02:56

Post by diocide »

Hey guys. I was wondering if anyone has an Eagle library part for;

-Dual gang 16mm (standard alpha) pot which is board mounted or which the holes aren't offset (like the ones in the MB library)

-a DPDT switch which is board mounted or where the holes are a bit more spaced out than the on in the MB library.

Thanks in advance!

User avatar
FiveseveN
Cap Cooler
Posts: 466
Joined: 25 Oct 2009, 22:20
Location: Romania
Has thanked: 130 times
Been thanked: 58 times
Contact:

Post by FiveseveN »

Might be quicker to edit or make your own from scratch. Here's a tutorial: http://hackaday.com/2016/09/22/making-a ... le-part-1/
Ignorance more frequently begets confidence than does knowledge. (Charles Darwin)

diocide
Posts: 2
Joined: 15 Jul 2015, 02:56

Post by diocide »

FiveseveN wrote:Might be quicker to edit or make your own from scratch. Here's a tutorial: http://hackaday.com/2016/09/22/making-a ... le-part-1/

Interesting. I didn't know you could do this. Nice!

I may just use two regular pots and space them for a dual gang.

The switch is the real pain.

Thanks!

User avatar
Jarno
Solder Soldier
Posts: 207
Joined: 12 Nov 2008, 11:18
my favorite amplifier

Accuphase E-308 (no money for it, yet)

Completed builds

Alembic-like state-variable and sallen-key filter preamps
Lovepedal Eternity
Phase 100
Brown source
Fuzz Face
Flipster
Alembic F2B (tube preamp)
Opamp and FET buffers
Loads of speakercabinets and ampracks
Busy building a modular synth (ssm2044 vcfs, preamps, ADSR's, VCO's, VCA's)

Location: Rosmalen, NL
Has thanked: 3 times
Been thanked: 9 times

Post by Jarno »

Dual 16mm pots are in the pot lbr, I believe that's a standard library.
There's also a switch library, but there are several footprints, so you might want to dig a bit.
"It crackles....., but that's ok"

Post Reply