Lovepedal Jubilee
- marshmellow
- Cap Cooler
Borrowed this for an afternoon to take a look inside. Yet another 386 circuit, yawn... But it actually doesn't sound too bad over the whole gain range, still nothing to write home about though.
For reference, the Purple Plexi and the Black Magic.
For reference, the Purple Plexi and the Black Magic.
- Attachments
-
- Lovepedal Jubilee.pdf
- (11.27 KiB) Downloaded 1987 times
-
- jubilee_3.JPG (48.64 KiB) Viewed 8556 times
- paulc
- Resistor Ronker
Information
I didn't know they worked together. I always wanted to work with Jack, but I despise Sean - In my opinion Vertex and Freakish Blues can't hold a candle to that guy's BS. I've got an OD11, grey ghost, Deluxe, Stevie, amp11... They were nice layouts though.calfzilla wrote:They are quite cozy. Very close....Motter wrote:That looks a lot like a Mr. Black layout.
And LP products seem to break into 7 main categories. possibly 8, but I've never seen a trace for the Toxic Fuzz.
- Jack Deville
- Resistor Ronker
Information
I'm only a phone call away, Paul.paulc wrote:I didn't know they worked together. I always wanted to work with Jack, but I despise Sean - In my opinion Vertex and Freakish Blues can't hold a candle to that guy's BS. I've got an OD11, grey ghost, Deluxe, Stevie, amp11... They were nice layouts though.calfzilla wrote:They are quite cozy. Very close....Motter wrote:That looks a lot like a Mr. Black layout.
And LP products seem to break into 7 main categories. possibly 8, but I've never seen a trace for the Toxic Fuzz.
- Manfred
- Tube Twister
Information
- Posts: 2041
- Joined: 04 Apr 2009, 23:42
- Has thanked: 1741 times
- Been thanked: 1426 times
I have a question about the tone stack.
The tone stack of the Jubilee is the same as in the LP JCM800 circuit except the potentiometer,
the value is 50 Kiloohms insteed 5 Kiloohms and this does surprise me.
Is the potentiometer value right?
The tone stack of the Jubilee is the same as in the LP JCM800 circuit except the potentiometer,
the value is 50 Kiloohms insteed 5 Kiloohms and this does surprise me.
Is the potentiometer value right?
- marshmellow
- Cap Cooler
Checked my photos, 50k linear is correct.
- Manfred
- Tube Twister
Information
- Posts: 2041
- Joined: 04 Apr 2009, 23:42
- Has thanked: 1741 times
- Been thanked: 1426 times
Thank you for your efforts.marshmellow wrote:Checked my photos, 50k linear is correct.
I was wrong in my post, I meant of course the Lovepedal Purple Plexi.
- bc108
- Breadboard Brother
Love this one! Like the Purple Plexi.
More punch and bass, and more controllable gain (due the input instead the irregular pot to ground).
Question: is not redundant the B50K + 4k7 resistor (=~5k)???
I've ommited the 4k7 and place there a b5k pot.
More punch and bass, and more controllable gain (due the input instead the irregular pot to ground).
Question: is not redundant the B50K + 4k7 resistor (=~5k)???
I've ommited the 4k7 and place there a b5k pot.
- bc108
- Breadboard Brother
And I'll add another question: which is the 370p cap function?bc108 wrote:Love this one! Like the Purple Plexi.
More punch and bass, and more controllable gain (due the input instead the irregular pot to ground).
Question: is not redundant the B50K + 4k7 resistor (=~5k)???
I've ommited the 4k7 and place there a b5k pot.
- Manfred
- Tube Twister
Information
- Posts: 2041
- Joined: 04 Apr 2009, 23:42
- Has thanked: 1741 times
- Been thanked: 1426 times
The LM386 circuit has an high gain, and it is therefore even more important to suppress radio frequencies.And I'll add another question: which is the 370p cap function?
The 370p capacitor forms together with internal resistance of the guitar circuit a low pass filter to get that done.
- bc108
- Breadboard Brother
Thanks Manfred..!Manfred wrote:The LM386 circuit has an high gain, and it is therefore even more important to suppress radio frequencies.And I'll add another question: which is the 370p cap function?
The 370p capacitor forms together with internal resistance of the guitar circuit a low pass filter to get that done.
Affect in someway if I place C2 before it?
- Manfred
- Tube Twister
Information
- Posts: 2041
- Joined: 04 Apr 2009, 23:42
- Has thanked: 1741 times
- Been thanked: 1426 times
If you place C2 before then C1 is in seriell with it and the total capacitance does not change significant the value of C1, the lowpass filter remains almost the same.Affect in someway if I place C2 before it?
And so I guess that there is no affect in someway.