Minimum input voltage for linear voltage regulator

All about modern commercial stompbox circuits from Electro Harmonix over MXR, Boss and Ibanez into the nineties.
Post Reply
Yazoo55
Breadboard Brother
Posts: 71
Joined: 27 Apr 2008, 12:35
Location

Morpeth, Northumberland, U.K.

Has thanked: 7 times
Been thanked: 9 times

Post by Yazoo55 »

What is the minimum input voltage for a 78l08 to work properly? I understood that at least 1.7 volts was needed on top, so really around 10 volts. I have just built the Ibanez RC99 rotary using Dirk Hendrik's build guide available via this forum. The pedal expects 9 volts. The schematic shows some power filtering before and after the 78l08 as usual. I measured 7.6 volts after the regulator which would be within the range given by the datasheet, but the datasheet gives a 2 volt dropout voltage.

Confused? I certainly am.

User avatar
plush
Resistor Ronker
Posts: 408
Joined: 08 Dec 2015, 10:29
Location: Moscow, Evil Russia
Has thanked: 28 times
Been thanked: 91 times

Post by plush »

Yazoo55 wrote:What is the minimum input voltage for a 78l08 to work properly?
It depends on the manufacturer. Usually dropout voltage is somewhere between 1.5 and 2 volts for 78l08.

Get a datasheet.

Or a better get a LDO, like TL750L08CLP or so.

Post Reply