Analogman - Prince of Tone

General documentation, gut shot, schematic links, ongoing circuit tracing, deep thoughts ... all about boutique stompboxes.
Post Reply
User avatar
Mbas974
Resistor Ronker
Information
Posts: 280
Joined: 29 Aug 2011, 12:13
Has thanked: 39 times
Been thanked: 40 times

Post by Mbas974 »

Hi, looking for thi schematic but nothing...

anybody know what is different between the circuits King and Prince, are these comparable ?

User avatar
Mbas974
Resistor Ronker
Information
Posts: 280
Joined: 29 Aug 2011, 12:13
Has thanked: 39 times
Been thanked: 40 times

Post by Mbas974 »

grabbing this from :




Prince sound to me has more volume..and nothing more.
Comments are appreciated.
Attachments
Prince Of Tone.png

User avatar
segoy
Information
Posts: 5
Joined: 10 Jan 2018, 13:52
Has thanked: 1 time
Been thanked: 1 time

Post by segoy »

There's very little information about this pedal in the web. It's of course half of KoT but not exactly.

First - clipping options. I assume that overdrive mode is classic KoT overdrive mode with 4 MA856 diodes engaged. Boost is with all diodes lifted. But what is the distortion mode in PoT? Only 2 shunted diodes engaged or both MA856 and 1s1588 all engaged?

Second - what exactly the dip switch do in PoT? I read the Analogman's description but technically - what does it do?
The manual says: DIP1 : LO-MID lift switch. The tone from your lower strings will be enhanced a little.DIP2: TURBO switch- with higher gain settings you’ll hear deeper compression, especially in DIST mode.

Third - Does PoT have 250k linear gain pot or 100k rev log gain pot?

Anybody knows the answers?

Post Reply