BAJA JVM overdrive pedal 040218  [documentation]

Original effect designs complete with schematics, layouts and instructions. Freely contributed by members and cannot be used for commercial purposes without consent of the respective owners of the copyright.
User avatar
GeoffroyLux
Information
Posts: 14
Joined: 05 May 2016, 11:32
Location: Luxembourg
Has thanked: 2 times
Been thanked: 3 times

Post by GeoffroyLux »

salin3 wrote: 07 Nov 2020, 17:38
Hi,

I can't see where the SW 1 - 11 goes, I don't find where the OUT is on the layout.
Can you help me figure it out ?

Thanks !!!



Sw1-11 is THE output, so the lead from Sw1-11 goes directly to the output jack ;)
Sorry for my English ^_^

User avatar
salin3
Information
Posts: 10
Joined: 31 Jul 2019, 08:32
Has thanked: 1 time

Post by salin3 »

Ho that was so obvious ... thanks for your reply ! Hope the pedal will rock now !

User avatar
GeoffroyLux
Information
Posts: 14
Joined: 05 May 2016, 11:32
Location: Luxembourg
Has thanked: 2 times
Been thanked: 3 times

Post by GeoffroyLux »

Let me know if yours is free of squeal ;)
Sorry for my English ^_^

User avatar
salin3
Information
Posts: 10
Joined: 31 Jul 2019, 08:32
Has thanked: 1 time

Post by salin3 »

I don't have that kind of squeal / buzz , mine is working ok.

User avatar
GeoffroyLux
Information
Posts: 14
Joined: 05 May 2016, 11:32
Location: Luxembourg
Has thanked: 2 times
Been thanked: 3 times

Post by GeoffroyLux »

Great !
That's mean I have to debugging mine ^_^
Sorry for my English ^_^

User avatar
salin3
Information
Posts: 10
Joined: 31 Jul 2019, 08:32
Has thanked: 1 time

Post by salin3 »

I've made the pedal and it sounds great.
Now I would like to add a tone stack but I don't know how to wire it as I've made a version with 2 separate volumes ( see layout) and I'd like to have only one EQ for both channels.
Someone could help me ? Thanks !
Attachments
Marshall_Tonestack_and_LPB1.png
Marshall_Tonestack_and_LPB1.png (27.66 KiB) Viewed 532 times
Baja JVM Overdrive 4.png

User avatar
Willypp
Information
Posts: 28
Joined: 02 Nov 2014, 14:20
Has thanked: 13 times
Been thanked: 15 times

Post by Willypp »

Hook the input of the eq to switch 1 - 10 on the board. Hook the eq output to switch 1 -10 on the switch itself.

User avatar
salin3
Information
Posts: 10
Joined: 31 Jul 2019, 08:32
Has thanked: 1 time

Post by salin3 »

Thanks for the replie !
I tried this but it doesn't work.
The pedal is working but the pots of the EQ don't react except the trimmer working like a volume.
Maybe a bad pot ?
Or someone would have a clue ?

Post Reply