Fuzz Tone Stacks

Frequent asked about building blocks: gain stages, buffers, clipping configurations, ...
Post Reply
User avatar
Muzzatron5000
Information
Posts: 18
Joined: 21 Apr 2021, 07:18
Has thanked: 5 times
Been thanked: 3 times

Post by Muzzatron5000 »

Hi all,
I've been trying to find a nice tone stack for my simple Bazz Fuss circuit.

I was after something that wasn't just rolling off some highs. Maybe adding a bit of colour. I feel like the tone circuit is an important part of the overall sound of the pedal.

So found this Big Muff tone circuit that's kicking around.
https://guitarpedalbuilders.blogspot.co ... ntrol.html

Ive wired it up to the same specs and placed it after the pcb output.

BUT It's more extreme than I was hoping for. I'm getting really muddy low tones to nasty super high noisey sounds.
(I tried running the tone circuit and a bypassed-tone signal together. It was better but the tone circuit became too subtle.)

If I wanted something smoother/less extreme, would it be a matter of just changing the cap values until I get something nicer to the ear?

or should I be looking at a different tone circuit? Rat?

Appreciate any wisdom! :-)

User avatar
Ichabod_Crane
Resistor Ronker
Information
Posts: 365
Joined: 26 Apr 2016, 15:11
Has thanked: 92 times
Been thanked: 38 times

Post by Ichabod_Crane »

Try to play with this calculator to fine your setting: https://www.guitarscience.net/tsc/bigmuff.htm

User avatar
Muzzatron5000
Information
Posts: 18
Joined: 21 Apr 2021, 07:18
Has thanked: 5 times
Been thanked: 3 times

Post by Muzzatron5000 »

OK thanks this looks like the way to do it.
:-)
Thanks

Post Reply