Dunlop - JBF-3 Joe Bonamassa Fuzz Face  [schematic]

All about modern commercial stompbox circuits from Electro Harmonix over MXR, Boss and Ibanez into the nineties.
User avatar
wcraffonara
Information
Posts: 10
Joined: 27 Jan 2011, 18:18
Been thanked: 3 times

Post by wcraffonara »

Dear all,
find attached my manual to my DIY JBF-3 project.

Regards
Walter
Attachments
JBF-3.pdf
JBF-3 DIY Manual
(556.4 KiB) Downloaded 289 times

User avatar
steben
Information
Posts: 17
Joined: 18 Jan 2020, 13:52
Has thanked: 2 times
Been thanked: 3 times

Post by steben »

The greatest secret in the FF story is biasing according to transistor gain. Thats why both germanium and silicon can sound good and can clean up. With an array of types.

User avatar
Manfred
Opamp Operator
Information
Posts: 1497
Joined: 04 Apr 2009, 23:42
Has thanked: 1335 times
Been thanked: 1022 times

Post by Manfred »

I made a modded PCB-Clone for through hole Componets according to the circuit diagram in one of the posts above.
BonamassaFuzzFaceTopLayout.JPG
BonamassaFuzzFaceBottomLayout.JPG
Ready-to-Print PDF-files:
BonamassaFuzzFaceComponentsSideTop.pdf
(5.9 KiB) Downloaded 10 times
BonamassaFuzzFaceComponentsSolderSide.pdf
(2.01 KiB) Downloaded 11 times
BonamassaFuzzFaceSolderSide.pdf
(3.38 KiB) Downloaded 9 times
SprintLayout6.0-file:
BonamassaFuzzFacePCB-Modded.zip
(9.03 KiB) Downloaded 12 times

Post Reply