SEEA - Fuzz Stereo [schematic]
- VitaliiBobrov
- Breadboard Brother
Information
SEEA Fuzz Stereo, made in Poland, my unit pots dated 1989.
https://www.effectsdatabase.com/model/seea/fuzzstereo) and mention in one of JHS Show episodes. My unit had a mess with wiring inside made by the previous owner, so I decided to trace it while fixing it. Basically, it follows Distortion+ topology (values are modified a lot), then Big Muff tone stack and gain recovery stage with signal splitting for stereo.
Schematic, not 100% that it is correct (especially stereo switch and output filtering) as it was my first time tracing something: Gutshots: BOM:
IC: NS TL082
D1, D2: Ge AAP158 (NOS I have measured around 400mV)
D3: 1n4148
D4: Red LED 5mm
D5: 1n4001
R1: 1M2
R2: 100k
R3: 10k
R4: 1M
R5: 100k
R6: 220k
R7: 910R
R8: 4k7
R9: 4k7
R10: 8k2
R11: 1M
R12: 1M
R13: 47k
R14: 100k
R15: 10k
R16: 10k
R17: 10k
R18: 10k
R19: 10k
R20: 4k7
R21: 1k
Pots Dist, Tone, Volume: A10k
C1: 18n
C2: 470p
C3: 330p
C4: 1u
C5: 4u7
C6: 150n
C7: 220n
C8: 100n (polarised)
C9: 47u
C10: 330p
C11: 470n (polarised)
C12: 1u
C13: 68n
C14: 47n
C15: 47n
C16: 47n
C17: 10u
C18: 330p
C19: 330n
Seems no info about this one except Effects Database (Schematic, not 100% that it is correct (especially stereo switch and output filtering) as it was my first time tracing something: Gutshots: BOM:
IC: NS TL082
D1, D2: Ge AAP158 (NOS I have measured around 400mV)
D3: 1n4148
D4: Red LED 5mm
D5: 1n4001
R1: 1M2
R2: 100k
R3: 10k
R4: 1M
R5: 100k
R6: 220k
R7: 910R
R8: 4k7
R9: 4k7
R10: 8k2
R11: 1M
R12: 1M
R13: 47k
R14: 100k
R15: 10k
R16: 10k
R17: 10k
R18: 10k
R19: 10k
R20: 4k7
R21: 1k
Pots Dist, Tone, Volume: A10k
C1: 18n
C2: 470p
C3: 330p
C4: 1u
C5: 4u7
C6: 150n
C7: 220n
C8: 100n (polarised)
C9: 47u
C10: 330p
C11: 470n (polarised)
C12: 1u
C13: 68n
C14: 47n
C15: 47n
C16: 47n
C17: 10u
C18: 330p
C19: 330n
- Attachments
-
- seea-fuzz-stereo-v2.pdf
- Schematic v2
- (75.7 KiB) Downloaded 156 times
-
- seea-fuzz-stereo.pdf
- Schematic
- (75.8 KiB) Downloaded 167 times
- Jarno
- Resistor Ronker
Information
- Posts: 358
- Joined: 12 Nov 2008, 10:18
- my favorite amplifier: Something nice
- Completed builds: Alembic-like state-variable and sallen-key filter preamps
Lovepedal Eternity
Phase 100
Brown source
Fuzz Face
Flipster
Alembic F2B (tube preamp)
Opamp and FET buffers
Loads of speakercabinets and ampracks
Busy building a modular synth (ssm2044 vcfs, preamps, ADSR's, VCO's, VCA's)
Tables
Bookshelves
Basses
So many things! :D - Location: Rosmalen, NL
- Has thanked: 27 times
- Been thanked: 79 times
Interesting, so the only thing making it stereo is a bit of highpass/lowpass?
"It crackles....., but that's ok"
- VitaliiBobrov
- Breadboard Brother
Information
Yes, seems just splitter and filtered differently
- VitaliiBobrov
- Breadboard Brother
Information
@lcv, Not bad - it doesn't have a lot of gain, but give crunchy/fuzzy vibe, tone control is pretty usable across the full range. Diodes clipping switch makes a pretty subtle difference (is just replaces Si diode with lower Vf Germanium one).
- VitaliiBobrov
- Breadboard Brother
Information
@Ben N - not sure, but to me it's more marketing as well, rather than usable feature. This thing doesn't seem to be very popular as I haven't seen it before and there is almost no info about both brand and pedal.